PDA

View Full Version : repositioning my dish for techno



dozz
02-01-2007, 01:41 PM
Wind has knocked my dish off line,its a fixed dish and still fairly rigid,but i am getting no or bad signal.Is it hard to reset myself or do i need more help.also any ideas how to do it on my setup menu.its a techno 1500 .cheers in advance

echelon
02-01-2007, 03:46 PM
if its a fixed dish then you cannot do it from the menu

it will need realigning onto your chosen satellite using either the technomate or an old an_alogue receiver or a meter

more details in the dish discussion forum

rickt
02-01-2007, 10:37 PM
One of the easiest means of re-aligning or tweaking your dish is to use a meter , these can be bought quite cheaply .This will be a one man job .You will need the asistance of a mate if you want to align it using your reciever ,unless you take the reciever out onto the roof ! I'm talking about a fixed dish here of course.

dozz
03-01-2007, 08:44 AM
thanks guys. I can now get some hotbird freeview by tweeking my dish but artsports is saying scramble channel.is that because my positioning is not good enough as I have 63 degrees on h polarity but only 6dergrees on v.Is that the reason i cant get artsports. thanks again:mad:

a1
06-01-2007, 09:58 PM
hi m8
easiest way to align dish. switch to god channel [ always open]
get small 5 inch portable tv round your neck and tweak till you can see it.
rgds a1