cine 1-2+3 not clearing

[tadge]

anyone else having problems clearing these channels

put new freq in rescanned still nowt.

useing technom8 1500

[tadge]

by the way chaps wtf is sid

[Graham7]

Working here on VN (Visionnet) on 11316V.

[mitega]

On astra are ok, on hispa you must change the symbol rate and FEC(if is isn't auto) of the tp

[tadge]

already changed them m8
still not clearing...

this has me head battered

[cumber46]

looks like all d+ down

[Hamrag1]

All D+ still working here On my Dragon 4.6

Hamrag1

[electral]

already changed them m8
still not clearing...

this has me head battered

You'll have to do Blind Scan m8,you can't manually put 7/8 in !
You can edit scan in Blind search.
cheers..

[forest1]

11891 v 30000 5/6 i beleive hispasat,then rescan:D

[electral]

11891 v 30000 5/6 i beleive hispasat,then rescan:D

Think you'll find it's fec 7/8 m8.(on Tech 1500 it'll find sym.as 30.001)
cheers..

[cumber46]

sorry my mistake all ok now for some reason my key bin has emptied read 000000ect never had that before

[fernandez]

by the way chaps wtf is sid

Service Identifier Descriptor
The Service Identifier is used by the receiver to identify a certain service within a transmission.

[tadge]

how do you find fec on technom8 chaps

[tadge]

You'll have to do Blind Scan m8,you can't manually put 7/8 in !
You can edit scan in Blind search.
cheers..


how do you find fec on technom8 chaps

[SatStar0x]

D+ All ok with the Special Secure Code for T-Rex Super...

[electral]

how do you find fec on technom8 chaps

Go into Blind Search,make sure Hispasat is selected,then go to r/h side,alter the t/p to your search Freq. Pol. then change SR to " 7.5 over " then OK.
Hope that does it for you.
cheers..:)

[clag]

D+ 30w look here
https://www.satpimps.co.uk/showthread.php?t=59055

[tadge]

na wont work (fookin thing )

gone back to me sammy
everything works now...

fookin techno****e

[garethh2000]

I get no signal on that Tp

[chelsea1]

I can't get any of these 7/8 30000 transponders to clear on my echostar either:frown:

[fred fickle]

Working ok here on 30 west on Hummy

[optical]

Cannot get my Plaza3300 or SS2 to accept new settings what is happening?

[teassoc]

Same problem. I've also got an echostar. I find the channels on the new transponders on Hispasat but can't clear them (with TSM). :confused:

[dishdad]

Cannot get my Plaza3300 or SS2 to accept new settings what is happening?

Re: the SS2.....should be no problem there... receives the transponders ok with the 'Setup4PC.exe' prog and with several viewers as:

12184 now showing 12186
12185 now showing 12187

[tadge]

pratted about for 3 weeks still cant get them working...

decided to stay on astra 19 east

all ok there

[maher]

i cant get them on 11891 v 30000 7/8

[dishdad]

i cant get them on 11891 v 30000 7/8

Tested here in Spain (Cordoba) with a 40cm on purpose to check the reception of 3 x vertical transponders at 30ºW.

If you had 'fringe' reception before (dish size etc) the situatuion is made worse of course with a FEC of 7/8 as opposed to 3/4......these reveal the difference in values.

12188 12189 12190

You can see that the received quality is lower for the FEC value of 7/8 on 11891

You may recall too, the saga of Fox Sports ME at 16ºE, where two transponders with the same SR's ie:

11021 H 2894 7/8 'Fox Sports ME'...and
11025 H 2894 3/4 '7 Gold'

present a big problem for those on 'fringe' reception as the FEC of 3/4 is the more receptive value. Fact is that although most receivers allow you to choose a FEC rating the entry is false as it uses the 'Auto' value. The Dreambox as an example will lock on to a proven transponder with ANY FEC value entered and many receivers follow this pattern.

The above shots are taken using the SS2 'Setup4PC.exe' prog.

Again, as was most certainly always the cure for 16ºE, I imagine a bigger dish is required.

[Terango]

People,

This subject was already discussed in here:

https://www.satpimps.co.uk/showthread.php?t=59379

Have a look to a possible fix...