nagra2 & Titanium card -HELP please

[mick]

Hi, can someone lease help. I have tried to program my Titanium card with this file "Tita1_Nagra2 D+ update 210107" but Premi & C+ does not clear. Anyone know why. I think I did it right. I used Titanium 1& 2 Card Loader.
I used infinity usb 3.58mhz, then erased card, said trapping card. reset card. os restored. It then said card can be programmed. Then I loaded eeprom & hex; It said card programmed successfully without errors.
Help please!!!!

[Burnham]

Have you tried a D+ channel?

[mick]

I meant to say D+ (not c+). I tried the tequ**a ones, but they don't clear. Any ideas please?

[Burnham]

19°e or 30°w ?

What cam ?

[mick]

I use the matrtix reloaded cam. I would like to program this with updated file, if I can find one, or program titanium card, so as to clear D+. I understand its clear on astra and hispa.

[Picapic1]

Mick,
not sure if it needs os 1.6 or 1.3, you should try and see
Tita1 Nagra2 Updater lets you update the keys with a phoenix prog

with speedy mrb3.16 you to change codes in your MR by hand - but it's known that you cannot zap channels to other prov iders or your cam will be erased

[McDude]

If you have a cas interface then it's easier to use mrb316 as mentioned in the above post or mrb307 for D+ but you can't enter keys with this last version

I've also read that a tit card will clear with MR 1.17 for a few people but you are going to use a MR with a tit card then it's better to convert it to N2 penta 1.09/1.11/1.20

[oscar]

Don't forget the defaut Ident -- 5101 or 4101 --it will not switch automatically between them.
Regards