Manuel enter keys ???

[Jeff Stuart]

If you enter ***view keys manually do they go into 02/03 like D+...ETC or elsewhere...any help on this please ?
Cheers Jeff :confused:

[McDude]

Using the remote:

Menu --> TOH --> Parser --> Ram Editor -->OK
Press P+ or P- till you see BISS-FIXED DCW screen or Press only the 'musical note' button (for radio ch's)
Go to an empty line : 00000000000000000000>Press OK. Insert the 20 digits-->Press OK.

exit everything (all menus/options) and finally press "Standby" on the receiver to store.

[sat_rrstm]

McDude pal,allow me to tell the whole story,once again and voith,please replace my previous version up in the stickies,I have added DCW for the not-biss channels in my ''how-to''.

''How-to'' input and delete biss keys using the remote controll

as posted by sat_rrstm.

We usually get a biss ch. codes in this form:NBA TV . Index: 1FFA .HEX key: 18396DEC81A625C0 (8 sets,16 digits)(this key is not the real one).

We need now the ch-ID in its heximal form(ch-ID of NBA is 4 and turns to 0004 in this case)
+ its PMT PID which is 32 and turns to 0020(we need only the last 2 digits)
+ its PCR Pid which is 8187 and turns to 1FFB (we need only the last 2 digits).
So the first 8 digits of the biss key-line are : 0004 20 FB.

Out of the 8 key-sets we skip the 4th and the 8th ones,so here is what is left:18 39 6D 81 A6 25,and here is the complete key-line : 000420FB18396D81A625.

When we have found CW of a not-biss channel,like ***View or MCT channels,
it looks like this:B 36B2 00 FD6C6DD6430E68B92DAF6B47CCC2A432 :*** View PLUS(this key is not active)
In this case we have to create two lines that have the first 8 digits similar.
These 8 digits are created in the same way as above with NBA TV and so for the *** View PLUS they are : 36B2 92B7 .
Now we get the 32-digited key we found and split it in two 16-digited parts
(we cut it in the middle):
So the key FD6C6DD6430E68B92DAF6B47CCC2A432 becomes :
FD6C6D(D6)430E68(B9)
2DAF6B(47)CCC2A4(32)
Now we add the channel's 8 digits in front of each created part and we skip
the digits in the brackets and we get the two lines we need:
36B2 92B7 FD6C6D430E68
36B2 92B7 2DAF6BCCC2A4.

Using the remote we go to : Menu --> TOH --> Parser --> Ram Editor -->OK
Press P+ or P- till you see BISS-FIXED DCW screen,or press only the 'musical note' button (for radio ch's)
Go to an empty line : 00000000000000000000>Press OK. Insert the 20 digits-->Press OK.We exit all menus and then press STANDBY on the BOX to store.

If we wish to delete a biss key line,first we flash it and then we press
instantly STANDBY button on the remote 4-5 times.
If we'd like to delete 2 key lines at the same time after flashing the first one
we keep pressed almost any button,except 'recall' button,for about 4-5seconds!

[Jeff Stuart]

Many thanks both for the explanation?
Cheers Jeff.