what have i done?

[ripley]

i uploaded a keybin using dsr ed56,it completely emptied my ram editor,i have managed to get d+,prem and cabo back,by manually changing the provider id in the ram editor,but no matter what i do i cannot get tps to clear,i have gone back to hot 7.9 then back to hot8.0,uploaded latest hdf but nothing works,has anyone got any idea hoe to get tps back.thanks,ripley:confused:

[Prontopro]

Clocks changed last night? Try that.

[ALIBE]

It's nothing to do with the time.
Leave your receiver on GMT + 1 hour

Try an alternative TPSHdf file.

The first one I tried today didn't work.

Also ensure that you have keys in the Ram Editor for provider 007C00

[sat_rrstm]

ALIBE is right.TPS.hdf file wouldn't work without 007C00 keys in Ram Editor,Viaccess section.

[ripley]

thanks for your replies,every provider i went to,(d+ ,cabo,prem)all the keys were gone,there was no provider id,s showing,for example ,if i was on a d+ channel i press ,
menu
parser
ram editor
there is no provider id showing ( 4101) i have to manually input the id,then it all clears,tps does not . i,ll keep trying.thanks ripley:)

[ripley]

when i am on m/vision (the free one) when i go to ram editor it shows up as
seca mediaguard 20 00,it is a pain in the ar*e,thanks in advance ripley

[ur4me]

hey ripley
had the same prob,reverted to 7.9 + latest hdf,pmct,key bin all is ok
try it m8

[ripley]

thanks for your help,i have tried everything you have suggested but nothing seems to work,i cant get 007c00 in my ram editor,i will try putting hot 8.0 back in with the latest pmct.thanks,ripley

[ur4me]

hi ripley
utilize samsung DSR9500 studio ver 1.3 to write keys.
upload latest HDF + write the BIN .
Gud Luck

[ripley]

i can,t even write keys to the ram editor,after entering the keys i press enter but keys won,t enter its just full of zeros,f%ck it.

[ALIBE]

If your Ram Editor is not accepting keys via the key editor or your remote control, here are a few things to try:


1. Try re-loading Catone3.0
2. Try loading a new channel set. This sometimes blanks the Ram Editor.
3. Try reverting to Catone2.9 and then back to Catone3.0
4. Try deleting all Biss keys with your remote. Include what look like blank entries.
5. Try reverting to an earlier ToH and then back to ToH3.4_HoT7.9

All the above suggestions are possible methods of clearing erroneous data that may be lodged in the key storage area of your receiver's memory.

If you attempt option 5, don't forget to re-install an up-to-date PMC Table.

Good luck.

[grumpyy]

Also try loading an empty bin with dsr9500
File / internal empty bin / Write

followed by current bin

Personally I'd go for reloading channel settings with hnfsmart first

[ripley]

finally got it running:) went to a earlier hot patch then back up to hot 7.9,installed catone 2.5,at the moment everything ok,i would just like to thank everyone for your help and advice,cheers .:D ripley

[ur4me]

congrats ripley
nice 2know u made it.cheers

[TonyO]

its then best to rebuild your s/w from scratch to remove any bugs that have gained a foothold, run delete all channels, install the original loader and operating s/w, then load the latest patch and channel and settings files, then a new key bin.

It usually cures most problems.