humax + (SBCL +vplug ) ?

[oulit]

humax + (vplug +SBCL ) ..
can this combination work, to clear tPS ,? :D

[oulit]

i confirm
tps humax ok
wsp v0.9.6 > sbcl +vplug
or
sharemax > sbcl +vplug


working ,but very very unstable. :mad:

[majidjan]

Hello
Could you please explain more ?
I have a SS2 and Humax 5400 .
Thanks.

[oulit]

here my SBCL.ini and WINCSC.cfg + jpg screenshot

very very unstable :mad:

http://rapidshare.com/files/27414602/rapidpimps.rar

[majidjan]

Thanks a lot .
I hope it becomes stable as soon as possible .;)

[skytec]

i confirm
tps humax ok
wsp v0.9.6 > sbcl +vplug
or
sharemax > sbcl +vplug


working ,but very very unstable. :mad:

Not working for me.
In V plug I got this:

00FF 0000 000000 0100 C**** Plus (SECA/MediaGuard)


Could you make a step by step guide?
Thank you.

[majidjan]

Hi again .
An active link for SBCL ?

[oulit]

TO FIX THE FREZ..
you need to use VERSION >= hot 3.4 ToH 7.7

[chivas12c]

Thanks oulit
Freezing is much less.

[oulit]

yes chivas12c ,much less. :D
i found that HoT 7.6 is the most stable.

if you change this line in sbcl.ini file ,you can decode all providers
from 007C00 to FFFFFF,
*****
TCPNcdPrvs=00050000000000062CE932 01FFFFFF0000000000000000007C00000 00000000000000000


skytec
1-run sbcl ,start newcamd server
2-run sharemax ,
3-zap to itele, zap to TSR ,zap to T*S channel...
you will get light..:cool:

you can find sbcl + WinCSC.cfg + One more screenshot .


http://rapidshare.com/files/27960680/2pimps.rar

[skytec]

yes chivas12c ,much less. :D
i found that HoT 7.6 is the most stable.

if you change this line in sbcl.ini file ,you can decode all providers
from 007C00 to FFFFFF,
*****
TCPNcdPrvs=00050000000000062CE932 01FFFFFF0000000000000000007C00000 00000000000000000


skytec
1-run sbcl ,start newcamd server
2-run sharemax ,
3-zap to itele, zap to TSR ,zap to T*S channel...
you will get light..:cool:

you can find sbcl + WinCSC.cfg + One more screenshot .


http://rapidshare.com/files/27960680/2pimps.rar


Thank you. All O.K. The problem was wsp v0.9.6

[oulit]

now all ok with wsp v0.9.6 ,BETTER THAN sharemax.
you need to modify this line in sbcl.ini


TCPNcdPrvs=00050000000000062CE932 02007C000000000000000000009400000 000000000000000

and you will get correct answer from server
example

[01:38:48] Server1 : Received CardInfo: userid: 0 caid: 0500 (Viaccess)
Provid 007C00 - TPS Fr [13E]
Provid 009400 - SRG Swiss [13E]

here you can find ;SBCL v1.1a +wsp v0.9.6 +modified PMC TABLE.
this method to clear t*s work only with ToH3.4 HoT 7.6 or 7.7.

http://rapidshare.com/files/28299300/tpfix.rar

[oulit]

set you pc time to GMT
.
.
http://i1.uploadem.com/04302007/wsp.jpg

[luis]

I think PC time should be the same as receiver´s (like in case of Dreambox), either GMT or GMT+1 or GMT+2.

[Siegfried]

There are many menu panels in SBCL and WSP. Can someone explain the settings needed? Also, the Help pages are in Polish so can someone provide an English translation? Finally, if you download the daily v_tps.db and tps.fns files into the Pluggins folder is the connection to the net still needed and if so what for?

Many thanks.

[charlie123]

there is a tut on this, but its about 30M, an AVI file, which tells u how to set this up with this V Plugin

U do need to get the latest files daily, as when the control word changes, then it will pick up the new one from the net

Basic setup of WSP

make sure, its not running, as u will see start on both Tuner and Server 1

Lets start with Tuner 1

address is localhost
port: 6001

login is test
password should be automatic
tick save to log

Tuner 1
RS Humax SSSP
COM1
tick save to log

Then click the advanced tab, in between Chat and EMU
Select Servers
All providers server - ensure its set to: Server 1
Ilosc serwerow is 1

Open SBCL

Now make sure u have loaded the V Plugin into this directory, u will know, as the VPlugin Tab will be next to the SBCL Tab

Select Tuner Tab
Communication is TCP
Port is 6001
Client Ip is 127.0.0.1
Protocol is Newcamd

SBCl x2 is not used

Make sure in TOH Config, that CAID is set to CARD+S+EMU
Card Blocker is set to ECM+EMM
Sharing Protocol is set to SSSP

Once u have loaded the updated files v_tps.db and tps.fns and tps.bin into the plugin direction u can start the programs.

I also put these in the AU Folder as well, just works when l do

then start SBCL
then click both starts in WSP

Then in SBCL, click the VPLUG Tab, click monitor

Vplugin 1.7.1.1 will be displayed
Make sure Active is ticked which is neXt to AutoECM on top row of Vplugin

Then go to tps CHANNEL
when it updates u will see NET on the miniguide, may take a minute or so to get new key, but u can also channel change as well, which is quicker


good luck

[maxhum]

you don't have to 'install' anything. Just unpack the file 'sbcl-humax-pw-ok'; double-click on the program-symbols of SBCL and WSP and select the correct comport in WSP (click first on the field 'Stop' to do this; afterwords on 'Start' again). Humax5400 and PC must be connected, of course via Nullmodem-cable to watch Premiere.
And have a look at the correct settings in the Humax-menu 'Config' (menu > ToH > Config):
- CAID Preselect = CARD+EMU+S
- Card Blocker = ECM+EMM
- Sharing Protocol Mode = HSIC

yes it works prem on a humax greetings:D

already here>https://www.satpimps.co.uk/showthread.php?p=447001#post44700 1

Thanks lies

[charlie123]

@Maxhum,

how did u get Prem Working mate?

[oulit]

charlie123
prem is decoded by new vplug
humax > wsp > sbcl+vplug

[lies39]

new version will get you tps and premiere thanks to fankoosh.

download from here :
http://www.zshare.net/download/2227884d55b896/

for tps you need to update the daily files.

[charlie123]

couldnt get it working last night

but thanks oulit and lies39, will give it a go later, thx

[ferddie]

i ferddie here i got pw working but not tps ,mulit channals:confused: is it still working or is it down .humax 5400 many thanks ..

[bertieton]

For Tps to work you need to download a v_tps.db and tps.fns file daily,and put them into the pluggins folder .You will find these files on any of the usual upload sites.:)

[charlie123]

I cant get prem to work, l can get TPS to work, wat the heck am l doing wrong

lve downloaded the file in the Sticky, but still No Prem

[grumpyy]

Prior to the release of hot 8.1c last night I could only get Prem but not TPS. I had tried sbcl with 7.7 and several other Hot emus

As soon as I installed 8.1c tps opened straight away on sbcl

One of those weird humax things I didn't change anything else

[majidjan]

Hello .
As you know MCT Redlight on Hotbird can be cleared using vPlug 2.1.0 .
Is it possible to use it + SBCL in order to have these channels on Humax 5400 ?
Regards.