PDA

View Full Version : 16e Nowhere to be seen Why?


DaOne
17-05-2007, 06:57 PM
Hello all.
I cannot get 16e on my VN8000CIS
My signal on 19e is near signal & quality is 95%
But 16e = NOTHING.. NOT A SNIFF.

Has the satalite moved?
Do I need new settings?
Does the VN need reprogramming or have i not uploded something?

I am sure I was born Blonde:D :D :D
zola25
17-05-2007, 07:26 PM
What transponder are you looking for? is your dish aligned right? pick one of the strongest transponders and try moving the dish left or right with the motor
quibath
17-05-2007, 07:31 PM
I can give you only one answer.( Do not have VN-8000)
"Has the satalite moved?"
No it has not. But perhaps Your wok is not aiming to the correct positition.:D
A
17-05-2007, 08:01 PM
hope you have the right transponder when looking for the sat
satmo
17-05-2007, 10:41 PM
the tuner is sh**e on the vn
stamfordblue
17-05-2007, 10:46 PM
11449 is a strong frequency
drpaulos
17-05-2007, 10:54 PM
the tuner is sh**e on the vn

I disagree. There have been a number of issues with the VN since Xmas, but I have personally found the VN a very sensitive receiver (and I have quite a collection of receivers to compare with :D )

DrPaulos
drpaulos
17-05-2007, 10:55 PM
11449 is a strong frequency

....or try the TVR transponder, as it has a number of FTA channels:-

11471 V
MPEG-2 29950 3/4

Most of the transponders on 16E have changed settings in the past couple of years, so for a lot of receivers, most (if not all) transponders defaulting on 16E are incorrect, therefore will give no lock. A manual entry of the TP settings may be required.

DrPaulos