Having Problems with D+

[billyreh]

Got a Humax 5400 with hot8.0 canot clear D+ for last few days uploaded it with DSR89500 5.6 tried loads of key bins just can cant anything. Any help would be apprciated.

Many Thanks
Billy

[ripley]

try u/loading the new hot 8.1,then input thelatest keys with your remote,d+ are changing keys up to 3 times a day,go toh->parser->ram editor,then edit whichever set of keys ,hope this helps:)

[faucon9999]

Hi All ,

It seems that many of us are having the same problem. In my case I loaded hot 7.7, followed by Mod 5 from Gpiupiu, to make vplug sw work.

Since then D+ has gone haywire and cant enter keys via remote like I use to. Cannot load a new bin file either.

When I select a D+ channel then go to parser I no longer get the 4101 provider as I use to. Instead I get seca 0606 and zeros everywhere.

With this info Im sure one of you guys has figured out what is going on..... I hope...

If so ... let us know.**Thanks

FM

[chilledin]

had same problem after trying varrious updateded bin fls.
make sure you have settings to "card ,emu ,s "think this is the right way if not try card , s, emu don,t know what diffrerence this would make but cleared on mine!!!

[dale]

I am currently using toh 7.9 on my humax and just enter the 2 lines of keys via remote with no problems at all! (touch wood)

[TonyO]

use toh 8.1b which has au turned off, otherwise false keys will be loaded by the provider.

[aslat]

D+ have been changing keys very often lately. Infact, they changes 3 times yesterday

Maybe you're trying an old BIN file?

[caribe]

I am currently using toh 7.9 on my humax and just enter the 2 lines of keys via remote with no problems at all! (touch wood)

That's what I'm doing too, using 7.9 and no problem so far.

[mary12]

HI had same with the hot 8.0 gone back to 7.9 works every time with NEW keys D+ is a bit hard work at the min new keys 3 times a day but only watch the footy so always catch it before keys go so its not worth switching to any new hot patch unless its better than hot 7.9 thanks

[billyreh]

Okay guys this is what I have done downgraded to 7.9 put in latest PMC Table put in new key all is up and running now.

Thanks for all the replies

Regards

Billy