New original out see stickies

[A]

new original 009 out see stickies

* Improved DiSEqC 1.2 and USALS compatibility
* Improved DiSEqC Switch compatibility
* Fixed audio track saving
* PVR Recoding 0mb fixed
* Added Teletext Recording & Playback
* Timer reminder fixed
* Signal Quality and Signal Strength readings fixed
* Radio recording fixed
* Added Auto Services On/Off Option in Expert Setup
* Improved cam compatibility
* Channel decoding speed increased
* RGB Output Level improved
* Teletext & subtitle Recording
* YPbPr Video quality improved
* Ngrab-lite & Wingrab supported
* Increased PVR TS Stream (16byte > 32byte Data Transfer)
* NTSC <-> PAL fixed
* OFDM API integrated
* Scart switching fixed
* Flash writing fixed
* Network Driver Upgrade with better DHCP performance
* Fixed RCU conflict
* Network stability improved
* Exit recordings by pressing 'exit' button

This is a Full version and can be installed on any version 001+

1. Download the new Technomate Control Center 6 program
2. Open TechnomateControlCenter_6
3. Click on Update
4. Enter the IP address and password of your receiver
5. You can now create a new password by clicking on PW CHANGE
6. Click on Auto Update
7. Select the Technomate_TM9100_TM9100Super_009 folder
8. Wait until the download has finished (the TM-9100 / TM-9100 Super will reboot after downloaded has finished)

Note:

After downloading the image, there will be no password (it will be blank/empty). To create a new password, use PW CHANGE in Technomate Control Center 6

https://www.satpimps.co.uk/showthread.php?p=452385#post45238 5

[echelon]

thanks m8

might be an idea for me to try this and see if it fixes any of the problems I have had :)

[A]

yes but you cant install emu on this one

[zad]

well this is a good sign, if this works correctly it may sort out the black holes in the ur and juliet images

[echelon]

ur009 beta also out ;)

[xanadu]

All the betas have been not very good.



Thanks for the info.

Hope this fixes the recording/playback and CI/CAM problems.

Off to test this original 09. :)

[Gone_Fishing]

ur009 beta also out ;)

lol that was quick :eek:


TNT

[xanadu]

Hope this fixes the recording/playback and CI/CAM problems.

Off to test this original 09. :)

I can confirm this has fixed the recording problems and T-Rex CAM resetting problems while recording.

Thanks very much. Well impressed so far. :D

Now off to try the UR009 beta version :D

[goodolddad]

New UR beta based on this release now out, am just loading it now.

[zad]

ur09 should be the most stable then if its based on this, hope the pvr side of things works, if it does i think ill invest in a new hdd for it

[goodolddad]

All installed and up and running, easiest install to date emu`s download straight out of the box, keys out of date but satan uploader sorted that out.
Hard drive behaving itself, so far so good, it did not want to install via sd card for some reason but it installed ok from ethernet.

[echelon]

I installed original009 and ur009beta on an sd card , all working ok but cannot record to hard drive ( as usual )

film4 seems to be lipsync ok

so as I have juliet006 working fine using an sd card I am just loading ur009beta onto the main flash so I can check its abilities and recording to hard drives etc

update went ok using ethernet , just scanning for channels , then will update the channel list with dreamboxedit , after altering the password and the ip address etc

[Gone_Fishing]

I installed original009 and ur009beta on an sd card , all working ok but cannot record to hard drive ( as usual )

film4 seems to be lipsync ok

so as I have juliet006 working fine using an sd card I am just loading ur009beta onto the main flash so I can check its abilities and recording to hard drives etc

update went ok using ethernet , just scanning for channels , then will update the channel list with dreamboxedit , after altering the password and the ip address etc

Do you need to scan I just upload my saved settings with dreamboxedit ?

Hope you have success with recording with UR in the main flash M8 :)


TNT

[echelon]

wasnt sure if I should scan or not so as its the main flash decided to go the extra mile

[xanadu]

Echelon you will have to reformat your HDD, then it should work.

My HDD records perfect after reformat.

[Gone_Fishing]

@echelon

In UR go to [Setup > Expert Setup] bottom of the list "Enable Filemode Autoplay" untick it otherwise it will drive you nuts
every time you go to your recording in file mode it will start to play so you cant select the one you want


TNT

[xanadu]

UR009 beta has many bugs, but original 009 is working fine so far.

Need to test more.

[echelon]

Echelon you will have to reformat your HDD, then it should work.

My HDD records perfect after reformat.

thanks for that, it was a struggle but I backed up some files with ftp and reformatted it eventually

seems to be ok on playback now on hits24 , vh1 classic on cabo , and fox on d+ , and boomerang on tps , so a lot better


should I have done a factory reset after installing ur009 beta cos I didnt ?

[A]

will try in in a while and get back here

[goodolddad]

If you do not mind going through set up again i find it better to do a factory reset every time i put an image on the box, that way i know it has been done and i have a clean flash memory.

[zola25]

Where is ur009 did not see it on the dark mans website

[echelon]

its in the beta section as its called ur009beta (tells you that in post 5)

there isnt a ur009 , yet !

[zola25]

Sorry i meant the beta
Found it now dont think i am awake yet think i will wait till i have had another coffee till i start to install it

[A]

Well it does not solve my audio and text problems.
I need to have Finnish or swedish subs and English audio.
Tried gsub and buulz text.
Bullz text does work but I need to keep starting it again and again when I change channel or provider.
I keeps getting stuck on channels due to this bullz text plugin.
As I dont have a h.disc so cant comment on improvements there.

[echelon]

Echelon you will have to reformat your HDD, then it should work.

My HDD records perfect after reformat.

excellent advice m8

tried reformatting 3 drives that were giving trouble and all work fine now

a 250gig hitachi , a samsung 160 gig , and a 40 gig samsung I tried at first

so the newer firmware seems to fix most recording and playback issues , but the reformat seems essential to get rid of any previous bugs

[zad]

excellent advice m8

tried reformatting 3 drives that were giving trouble and all work fine now

a 250gig hitachi , a samsung 160 gig , and a 40 gig samsung I tried at first

so the newer firmware seems to fix most recording and playback issues , but the reformat seems essential to get rid of any previous bugs

thats good news!
are you running this from flash or off mmc, if its off mmc what do you have in flash?

[Gone_Fishing]

excellent advice m8

tried reformatting 3 drives that were giving trouble and all work fine now

a 250gig hitachi , a samsung 160 gig , and a 40 gig samsung I tried at first

so the newer firmware seems to fix most recording and playback issues , but the reformat seems essential to get rid of any previous bugs

Maybe UR8 in the main flash would have done the same ?

Shame they put the loudest small fan in they could get :rolleyes:

Although the Samsung Spinpoint are designed to run cool so I think they are pretty safe to run without the fan for a couple of hours


TNT

[echelon]

my flash is now ur009beta so I can test scrambled channels

but it is on the mmc card too , but wouldnt record when booting from the card

[Gone_Fishing]

Can someone post the cpaneltm.xml in var/etc from 009 as I'm sticking with 008 but want the download panel from 009


TNT

[A]

Here

[Gone_Fishing]

Thanks A ;)

Edit : Sorry M8 thats the wrong one thats cpanel.xml

Its cpaneltm.xml that has the urls in


TNT

[A]

now I dont have the box anymore with me today
Maybe someone else would post it or else I will tomorrow

[Gone_Fishing]

Thats alright m8 no problem :)


TNT

[echelon]

Thanks A ;)

Edit : Sorry M8 thats the wrong one thats cpanel.xml

Its cpaneltm.xml that has the urls in


TNT

looked for this file and its not there , just the one A posted

[Gone_Fishing]

ok thanks m8 they must have changed it in 009 maybe it works like the juliet one


TNT

[zad]

ur009 now installed and working a charm! this is by far the most stable image i have tried out so far!

[eme]

tep, no problems except the self rebbooting problem, its done it once while recording, they need to fix this or all is in vain. but i do like it as much as the dreambox and it could be much better. ;)

[tr8.]

got to say i find the ur009beta the most stable of any and may even be better than my 7020 now

tr8

[xanadu]

got to say i find the ur009beta the most stable of any and may even be better than my 7020 now

tr8

I find UR009beta very poor and unstable, just like all their previous versions.

[A]

I find UR009beta very poor and unstable, just like all their previous versions.
agreed keeps reebooting.........:)
I have stopped using it lets see if a better image comes out

[zad]

agreed keeps reebooting.........:)
I have stopped using it lets see if a better image comes out



strange, i have not had a reboot yet since installing this image

[A]

depends on what sat/encyption/emu you use this box.
Yes mgcam 1.24 maynot have dropouts but cc cam does.
Audio problems exists where it can reboots the box when trying to use subs and audio together so..... each to his own I guess