PDA

View Full Version : Invacom SNF-031 0.3



piratt
06-07-2007, 02:35 PM
Hi all,i have LNB Invacom SNF-031 0.3 on label LNB i look made in china and CE is this original Invacom SNF-031 0.3?I tested in low band 10.758v on nilesat and show bad result 3% compare with Inverto IDLP-SFLANGE 0.3 but high band works mach better

TonyO
06-07-2007, 03:26 PM
In the satellite old days you got a bit of paper with your LNB which gave you the gain results at high mid and low frequencies, some had really good figures at high frequencies but were ****e at low.

Usually the dealer if you knew him or for a few quid more would give you one that had high gain at all frequencies, the manufacturing process was obviously not guaranteed to produce the same gain at all frequencies.

piratt
06-07-2007, 04:18 PM
Maybe receiver lies in signal quality on this frequencies 10.758V on nilesat and other low frequencies on Amos,receiver is eMtech200CI with invacom show Signal strength-83%signal quality-37 and picture freezing with inverto signal qulity-37-40%and no breaking or maybe my feedhorn is poor quality for low band diameter feedhorn is 59.5 and lenght 54 мм