Humax Box Problem

[dave0147]

I've just upgraded the firmware to the latest so I can watch Premier,then put the channel list in again and then a key file. But when i go to watch a free to air channel or an encrypted channel i get no picture?

Can any of you guys shed some light on this problem please.

cheers

dave0147

[zad]

have you pulled the cable out of the back (lnb cable)

[dave0147]

LNB cable still in, and the motor still moves.

cheers dave0147

[zad]

best thing i can suggest then is check the lnb, if its still moving its unlikley its the cable.

are you sure its all channels?
what is the message you get on the screen?
if its no sat signal recieved is your box still aligned correctly?

[dave0147]

Not sure what the error message is, as I'm at work and cant check I will let you know later.


dave0147

[dave0147]

This is doing my head in I re patched my box original firmware then the latest patch,then had a look in the menu for the singal strength and quality and they were both 75%. then put sky news on 19.2east no picture.

any geniuses out there that can help PLEASE


dave0147

[TonyO]

start from square one, load original s/w, get that working on fta then
re-patch.

If you use scart leads check those, they always give me grief, the worse socket and plug ever developed.

[Prontopro]

Are you definitely pointing at 19.2east? Can you tune into the FTA german channels? Have you got the latest keys stored for D+ and Premier? Can you read the keys in the RAM Editor? Have you got the box set to Card+EMU? When you press the RED button to bring up the channel listing do you see the letter N in a small box with EMU above it, or does it say TRY?

When you tune into Sky and it doesn't show, stay on that frequency and do a scan for channels to see that it brings up the correct programmes (including Sky) for those settings. Check with Lyngsat website if necessary.

[dave0147]

Cheers guys will give it a try later tonight

dave0147