Black screen in my humax 5400z

[marina]

Finally got my first 5400z modified to 5400 with the Z-board, humax is patched now. One more problem still remaining which is; channels are still scrambled. Fun card in the cam slot & also the latest bin file, when going the French channel for example i get black screen with this message "the audio is not available or scrambled" i'm thinking about restarting the patch would this solve the problem?
Cheers.

[ceyer]

TPS only updates on Transponder 10872V (France4,5,O M6 Black,M6 Rock)

Leave it on one of those progs and all will be fine :-)

[zad]

silly question but you have programed your fun card with a 6in1 file?

[marina]

Fun card is programmed m8?
TPS worked for a few seconds, the channel kept freezing & then stopped. Are the key bin supposed to be empty & the keys must be put in? Downloaded the latest key bin & with this tool, dsr9500 emuedver4.2 on the left column i clicked on 007c00 & then it gave me no keys! any more answers please!
Cheers.

[bobbyboil]

have you changed the config to be 'card+emu'

have you changed the time to gmt+2

because you should have

[voith driver]

hi marina,
there's your problem m8, you cannot load the new bins without dsr 9500 5.6, always tick verify, as this is a good check to make sure its gone in
voith

[marina]

@ voith driver thanks m8 for the post 'dsr 9500 5.6' is what was exactly needed picture is clear now, i also thank everyone on this thread.