TPS and Premier

[billyreh]

I have installed the 9.2 update thanks to all the team for getting it out to us. I can get d+ to update but not TPS or Premier is there anything I should do I have set the time +2 hours, It updates TPS on 9.1 all the time and also Premier worked since the update its reverted other way around.

Your help would be most appreciated

Regards

Billy

[seadragon]

hi billyreh

I too upgrade 9.2 from 9.1
everything seems ok.

I went to channel France 5, it took 25 sec to update..

hope that helps

[billyreh]

I have tried that a few times france 4 and 5 still no joy. Thanks for that

[voith driver]

hi billyreh,
I know this does not help, but i have just installed the new 9.2, premier took about a min and tps just under on france 4

voith

[billyreh]

@voith driver

Done all; that I used to on 9.1 go to France 4/5 and in 2 ticks it would be okay on Premier it just worked then I stook on 9.2 and I get d+ but nothing on the other 2. Nothing else has changed.

I will reload it and see what it does.

does the cam need to be in or out

[ferddie]

when you go to hotbird france4 i re boot the box and it comes on in about 15 sec .worth a try.

[GUNFIGHTER]

hi all have updated to 9.2 but no change at all on any channel

[fixer1]

all gone tryd 9.1 and 9.2 the strange part is if i select france 4 after abt 3 mins the pic comes on seconds latre it goes then comes back it dose this abt half a dozen times then nothing if i switch off on same thing happens any help would be great thanks

[sat_rrstm]

does the cam need to be in or out

This is your problem,check in the "readme"txt in every recent fw folder :
"Humax ToH3.4 HoTplugged v9.2 - 2007-08-19
-- Version: A --
============================
- TV CABO AU
please remove CAM while updating
Humax ToH3.4 HoTplugged v9.1 - 2007-08-13
-- Version: A --
============================
- D+ AU
please remove CAM while updating"

So,before you tune on France 4 take out your CAM and check if the time is GMT+2 on your Hummy.

[billyreh]

Yeah but D+ works no other does. I read that does this apply for Premier and TPS

Billy

[fixer1]

done that pal only one that seems to work is tv c*bo and thats when i manualy enter the keys t*s and prem is a no go?

[billyreh]

Right I have managed to get TPS and d+ to work but no go on Premier what i did was go to france 4 and leave it there for 5 mins then go to multi 1 and it opened then went to d+ and it opened but Premier isnt working any suggestion appreciated.

Billy

[Marco]

have you tried going to prem channel and reseting r/c wait for about 20 secs for au to kick in. failing that start from scratch

what i nomaly do is clean my hummy. when something
does not seem to work propely

1. save your settings
2. delete all channels
3. firmware reset
4 original firmware
5 latest patch
6. settings
7. bin
8. pmc

[billyreh]

@MARCO

I will have a good at that whats R/C sorry to be thick failing that i think I will trash it and start again.

Thanks for all who has helped.

Billy

[Marco]

@MARCO

I will have a good at that whats R/C sorry to be thick failing that i think I will trash it and start again.

Thanks for all who has helped.

Billy

remote control, sorry billyreh