deleting a satellite on a 3600

[alrod]

How do you delete a satellite on a 3600 it does not say in the manual and the software was issued in 2002 and satellites have been replaced and new ones added since then
thanks in advance Alrod

[cleanrite]

Can you upgrade the software on 3600 or how do you upgrade the software

thanks

[alrod]

thanks for enquiring cleenwrite but the software is v 1000 as on the echostar europe website and it has not been upgraded since 2002
yours truly Alrod

[carbonne]

Alrod,
i have a 3000 and am not sure if they run similar software.
if there is an edit key in the main menu select that
followed by edit satellite then select red button to delete satellite.
hope this helps

kind regards
carbonne

[alrod]

Carbonne thanks for the reply but it does not work on a 3600
regards Alrod

[Mickha]

I don't think you can delete a satellite from the list but you can add new ones and tune them in.
From memory, press the white button and choose add data.
Click on the satellite list and scroll down to Satellite oo, or something 00, click OK, name and add the new satellite.
You can then select this satellite, move the motor to the correct position and scan for channels.
This is from memory so please post back if the information isn't correct.

[alrod]

Thanks Mickha I know how to add a sat I just wanted to bring everything up to date yours truly Alrod

[norton850]

alrod:
I am not sure if this will work on the 3600, but...
I have a DSB 808 2Ci Via and I can delete satellites by:
1) scan to load channels on the satellite to be deleted
2) when there are some radio channels loaded, press the "exit" button to abort the scan
3) exit out to watch the tv channels
4) press the red button "TV/radio" and select radio
5) press the "OK" button and then press the white button (edit) and select "delete" as if you wanted to delete the radio channels
6) select the "satellite" group of radio channels
7) I then get the option to either delete the radio channels or satellite
8) I can then choose "satellite" and this will delete the satellite

You may have to press the "OK" button a couple of times and then motor to another satellite to watch tv.

be well
norton850

[Ghoulie]

you can delete the whole content of a satellite on the 3600. Be on the sat in question - hit the centre button on remote that brings up the page of content your on and I think you select the green colour bit on remote (says - 'list by satellite'). Now hit the white edit button on the right for delete - go to channel 1 and above it you will see that the Sat you are on also has a button to the right allowing you to delete the whole content in one go. I have yet to find in the book anyhting that remotely describes this operation - came upon it purely by chance playing around - & used it successfully several times to clean up too many channels for a clean rescan

[alrod]

Many thanks go to Norton850 & Ghoulie, I will try this tonight
Yours truly Alrod

[Ghoulie]

any joy alrod?

[gentlmen]

Here is How you can delete a satellite from your sat list...

you make sure you are not on the satellite that you want to delete.
1.view All channels
2.view per sat
3.press white button to and select delete
4.Asks TV or sat chose sat press OK.
5. save changes press OK..

Thats all folks.....;)

Have nice day...:):):)

Sorry Ghoulie I jut want to make sure there is a way like we do...


Gent...

[simon 2003]

yer sort by sat then white button delete

[alrod]

Thanks everyone I tried Gentlmen post and cleared up the satellites I did not want , Sorry it has taken this long to acknowledge this thread but I have been busy visiting my brother in hospital
Yours truly Alrod

[Ghoulie]

nice one Gentlmen