quad lnb or not?

[Fil]

only want two outputs to two different stb's

how?

http://img.photobucket.com/albums/v12/XRfil/lnbquad.jpg

[echelon]

thats a quattro , not a quad

you need a twin or quad lnb with 2 or 4 separate outputs

[Fil]

dam it bought the wrong thing!

so hows the 4 outputs work? as in 4 cables out into one reciever????

[echelon]

I got the following from google


A QUAD LNB gives you 4 independent LNB feeds which can receive switching signals from 4 digital tuners and allows the full range of tuning options to be used. These being Horizontal, Vertical, High Band and Low Band.

A Quatro LNB has 4 outputs each one represents one of the 4 tuning options as mentioned above.
The 4 outputs of a Quatro then feed an IF distribution system which in turn then feeds X amount of digital tuners, this system is used for communal systems.
There is no two output version of a Quatro for the reasons given:)

The Quad LNB is in fact 4 seperate units in a single housing each with an independent connection to the digibox tuner. The tuner then sends commands to the LNB which sets the H/V and Low/High band status and since each of the four LNB units in the housing are independent they can be tuned to a different transponder at the same time.

Communal distribution systems use quattro LNB's rather than Quad LNB's. You have a multiswitch connected to the quattro by four cables and can get them in various sizes

[Fil]

sort of what i figured, £11 wasted then oppps!