PDA

View Full Version : Samsung DSR9500AY, menu mode



svenejan
01-10-2007, 06:02 PM
My aging Sammy has all of a sudden gone into menu mode and it is impossible to watch any channels. It is possible to move around the menus and to change settings and so forth but I can't exit the menu mode. The reset button on the PCB resets the receiver but it goes back to menu mode. Does anyone have any suggestions on how to fix my Sammy or is it time to buy something new?

A
01-10-2007, 06:47 PM
tried power off from the mains ?????????????

svenejan
01-10-2007, 07:18 PM
Yes I have! It still goes into menu mode.

A
01-10-2007, 07:26 PM
try firmware update via satellite hotbird or sirus

pege63
02-10-2007, 07:35 AM
You can find your answer in papagen.org look there

A
02-10-2007, 10:26 AM
You can find your answer in papagen.org look there

you can post that answer here instead of making him run there

pege63
02-10-2007, 10:59 AM
Why when you can find so much more than just that, there :rolleyes:

A
02-10-2007, 11:35 AM
Why when you can find so much more than just that, there :rolleyes:
GO THERE FOR A WEEK THEN COME BACK:mad:

Bod
02-10-2007, 03:31 PM
Yes I have! It still goes into menu mode.

sounds like you've lost your channel list , try a rescan of the satellites you normally use or upload a ready made channel list
you can find some here https://www.satpimps.co.uk/showthread.php?t=60746

Bod

svenejan
02-10-2007, 07:26 PM
Thanks everybody who have answered my outcry for help. I have tested everything you have suggested. I even read almost everything at Papagen but it seems like Bod was right. I rescanned a satellite and when it found the channels it started working again!

A
02-10-2007, 08:03 PM
Good for you m8

goran
06-10-2007, 09:55 PM
Yeah, put a good list of channels [Cuorino or Edin] in and then redo it yourself - as you will have to rescan a number of transponders, because Sammy simply refuses to see the imported one sometimes...;):)