PDA

View Full Version : astoncrypt 1.03


baztheblade
15-10-2007, 10:51 PM
Hi, is there any use for this version to be used for setanta with official ppv card. thanks baz.
Kipper2
06-11-2007, 08:39 PM
(I'm a donor not a 'donator')

The latest Setanta cards wont work with the old Ondigital & ITV digital boxes so they wont work with this CAM either.
Cheers
cdtuk
25-11-2007, 03:03 PM
anyone know how i can update the fw on an aston cam using a cas3 ? cant find any info
madsod
25-11-2007, 04:30 PM
you cant do it with a caz . some say it can be done with a laptop but it think that might just be for conax , from what i have read , have a look on the net , but cas no way
cdtuk
25-11-2007, 07:26 PM
ok cheers for that.
pilsner
25-11-2007, 07:31 PM
yes it can be upgraded using laptop used to do it years ago.pilsner
Cliff
25-11-2007, 09:12 PM
No you cart upgrade a 103 cam and if you try it will be for the bin.
You can convert it to I think it was cryptoworks via laptop running win 95-98
I seem to remember the 104 and 105 software were for the euro cams and the chips had to be programmed off the cam and if you try and install either of these fw (which I did :frown:) to a 103 the cam is a cam no more.;)
cosworth4x4
25-11-2007, 09:48 PM
1.00 to 1.03 or cryptoworks.
1.04 (has to be r1) to 1.05 .

above done via laptop .

1.05 to conax v 4.0 irdeto 11 and viaccess red not via laptop and assume its chip off.
daxv8
26-11-2007, 12:10 AM
Hello,

I to have an old seca 1.03 not being used . Any use and what can I convert it too. I do remeber you could covert to cryptoworks and is some upgrades you had to remove the chip and blow a new one and resolder .
Is that still the case all ? Or just sell it on .

Cheers
pilsner
26-11-2007, 11:42 AM
unless im mistaken i seem to recall ugrading one years ago using xaload11 youve got me thinking now??
pilsner
26-11-2007, 12:05 PM
here u go everything u need ***.lefdata.com/satellite/cam/.pilsner (have fun)
cosworth4x4
26-11-2007, 08:38 PM
unless im mistaken i seem to recall ugrading one years ago using xaload11 youve got me thinking now??

yes there was another program as well something 106 if i remember correct ,i did write programming instructions at one tom for xaload.
Cliff
28-11-2007, 06:30 PM
yes there was another program as well something 106 if i remember correct ,i did write programming instructions at one tom for xaload.

Was it IRD106
If I get time Ill pull the old laptop out I use to use and have a look