View Full Version : Digi TV 1°West signal strength
ian_t_baxter
09-11-2007, 09:58 AM
Hi
I've eventually decided to have a go at picking this package up. Does this package have a week signal or is it Intelsat ? For some reason I'm only able to pick up the V transponders. Whenever I try to find any of the H transponders (e.g. 12563.00 H 27500 3/4) I get so signal. With the V transponders I'm getting about 55% signal quaility.
I've never had any problems in the past picking up channels on thor 0.8w so I thought this would be easy.
I've got an 80cm dish with a 0.2db Smart Titanium LNB
Any ideas anyone
Ian
echelon
09-11-2007, 10:05 AM
depends on your location ( you didnt say where you are ) but I know it works on an 80cm dish near my location , and ok on my 1.1m dish too
try these on 0.8w
12607h 27500 digi tv info & a1
12687v 27500 ct24
12687h 27500 otv
12643v 27500 pratech
12643h 27500 pratech
all fta
ian_t_baxter
09-11-2007, 10:09 AM
depends on your location ( you didnt say where you are ) but I know it works on an 80cm dish near my location , and ok on my 1.1m dish too
try these on 0.8w
12607h 27500 digi tv info & a1
12687v 27500 ct24
12687h 27500 otv
12643v 27500 pratech
12643h 27500 pratech
all fta
I'm in Newcastle
Cheers
Ian
echelon
09-11-2007, 10:16 AM
should be no problems then as you are in one of the ideal places ( east coast ) , and you are east of me too
ian_t_baxter
09-11-2007, 10:20 AM
should be no problems then as you are in one of the ideal places ( east coast ) , and you are east of me too
Something wrong then. Could it be a dish elevation problem ? Also my dish is an old mesh one which I've had since my sly analog days. Do you think that could be the problem ?
echelon
09-11-2007, 10:24 AM
my friend uses the old sly 80cm lenson heath dish and gets it fine
could be that you are not aligned properly , or the lnb skew may be wrong or not universal type lnb ?
if you get other channels ok on 1 west and/or 0.8w then I dont think its the dish
so make sure you are using a modern universal lnb and not an old an@logue sly one
ian_t_baxter
09-11-2007, 10:25 AM
my friend uses the old sly 80cm lenson heath dish and gets it fine
could be that you are not aligned properly , or the lnb skew may be wrong or not universal type lnb ?
if you get other channels ok on 1 west and/or 0.8w then I dont think its the dish
so make sure you are using a modern universal lnb and not an old an@logue sly one
Thanks for the help. How do I check what my skew should be ?
It is a universal lnb. My setup is motorized and I use it's mainly pointing at 13e and 19e
echelon
09-11-2007, 10:32 AM
basically , on 1 west the cable underneath should be pointing straight down
ian_t_baxter
09-11-2007, 10:42 AM
basically , on 1 west the cable underneath should be pointing straight down
thanks mate I'll try tonight and report back
@ian_t_baxter
Sorry if I have missed this, but you have not stated what type of receiver it is that you have. I am also in Newcastle, and a M8 of Mine had a similar problem as to the one that you have, he had a Sammy 9500A on 1 West, Vertical - OK, Horizontal - Zero, when then replaced the Sammy with my Techno 1500, and all channels came in loud and clear, so maybe it is the Tuner on your STB, as it appeared to be on his.
ian_t_baxter
09-11-2007, 11:59 AM
@ian_t_baxter
Sorry if I have missed this, but you have not stated what type of receiver it is that you have. I am also in Newcastle, and a M8 of Mine had a similar problem as to the one that you have, he had a Sammy 9500A on 1 West, Vertical - OK, Horizontal - Zero, when then replaced the Sammy with my Techno 1500, and all channels came in loud and clear, so maybe it is the Tuner on your STB, as it appeared to be on his.
I'm using an innovative. I'll try my tm5500 and see if that solves the problem.
Thanks
Ian
tadge
09-11-2007, 12:01 PM
in down in co durham ian and getting a decent signal m8
should'nt be a problem
[QUOTE=ian_t_baxter;485128]I'm using an innovative. I'll try my tm5500 and see if that solves the problem.
Hi M8
I've just tried my Inno on the Digi TV Channels and all are clearing, with Galaxie Sport - Signal 79 - Quality 70. Try BBC World (Thor)@ 11325 H 24500 it's coming in at S 91 - Q 83.
ian_t_baxter
09-11-2007, 12:49 PM
Aldo
I can pickup Galaxie Sport because it is on a V transponder. BBC world is fine also but that is on Thor 0.8 rather an Intelsat 10-02 1.0W.
Can you get Sport 2 Hungary ? (12563.00 H 27500 3/4)
Cheers
Ian
"Can you get Sport 2 Hungary ? (12563.00 H 27500 3/4)"
Yes, it's currently showing Kaposvar v FTC ( Score 2-0) S 73 - Q 64
echelon
09-11-2007, 01:03 PM
sounds to me as if its either a receiver or an lnb problem
and if 2 receivers have the same fault , then it must be the lnb at fault
that is assuming your cable and its connections are ok
ian_t_baxter
09-11-2007, 02:28 PM
thanks chaps, I've got a couple of things to try now.
Ghoulie
09-11-2007, 04:17 PM
my 80cm mesh dish picking up ok - 60%
def sounds like the lnbs at fault, ive had a few over the years just lose either H or V channels
Maybe Ian will come back and tell us what it was that was causing him to have no Horizontal channels.
Bbigfoot
10-11-2007, 04:52 PM
Hi ian_t_ boxer,
It could be your on Thor 0.8w and just picking up Intelsat @ 1w.
BBC World is on both Sats (1st), after that in my channel list, 2nd on
Intelsat is (Poker Channel).
The 2 Sats are just 50mm (2") apart.
If your in Disqc, go into Motor setting and tweek your Dish.
1-1 Crap, left Goal scorer out till last 4 min, played winger as
Left Back.
Bit better then last game played left sided player on right,
played right sided player on left. Left out goal scored till last 25mins.
(Sam there"s £4m...**** Off).
Bf...
ian_t_baxter
10-11-2007, 05:49 PM
thanks for the help chaps.
I adjusted the skew on my lnd and I'm now getting sport 1 & sport 2 perfectly
Hi M8
I'm pleased to see that you have got your problem sorted, and that you are getting all the Digi TV channels you wish to receive.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.