PDA

View Full Version : Vantage 00.41.00.27AOA for 2xx series


angles
10-11-2007, 06:08 PM
The readme:



[Final Updated]
- Cryptoworks hangup problem.
- DREcrypt/ddongbang card problem
- TPS auto-updating by pressing F1 key in TPS transponder.
- NDS Card Auto-roll
- OTA channel region download
- Pr*****e key update
- Rai biss key update
- TSI channel descramble problem (Cryptoworks)
angles
10-11-2007, 06:52 PM
[Final Updated]
- Cryptoworks hangup problem.
- DREcrypt/ddongbang card problem
- TPS auto-updating by pressing F1 key in TPS transponder.
- NDS Card Auto-roll
- OTA channel region download
- Pr*****e key update
- Rai biss key update
- TSI channel descramble problem (Cryptoworks)
mjn
11-11-2007, 09:57 AM
Can't get TPS to update at all with this version, just get the 'videotrack' message displayed and thats all.
Also they have changed the key input commands to use the LAST key instaed of the FAV key for the letter 'a'. This now screws up my programmable remote. Why can't they leave well enough alone ???:confused:
cuorino
11-11-2007, 11:25 AM
Delete your channel and scan frequenzy 10873.
Some models are ok, many have problem.
We wait to fix it.
Other bug: with new firmware Pols*t too isn't clear with right key.
mjn
11-11-2007, 02:26 PM
No ! Still doesn't work ! :frown:
pege63
11-11-2007, 06:10 PM
In the last 3 FW versions DragonCam with Predator 360 does not working it knockes out the EMU in FW, whys is that?
Why the Predator 360 knockes out the FW and how?
mjn
11-11-2007, 06:25 PM
Usually on most receivers with internal emu's an additional emu in the form of a cam will cause conflicts.

Like your avatar pege63 ? ( not vantage )
pege63
11-11-2007, 07:20 PM
Well in my avatar my DragonCam works as a klock just knocking out my Vatntage for a reason i want to know the cause of this?:rolleyes::confused:
angles
11-11-2007, 08:11 PM
No ! Still doesn't work ! :frown:

TPS AU works for me. I have the 221 TSCI.

Scan frequency 10873, then select the channel "FRANCE 4" for excample and then press the F1 button. A message appears "Auto Updating, please wait...." and 10 sec later, picture clears.


Did you do a Key reset before? Thats important. Allways make a key reset after flashing the box with a new firmware.

good luck!
pege63
12-11-2007, 07:51 PM
The "b" has the FAV key does not working in new FW or is there a nother key för b in keyedit?
angles
12-11-2007, 08:06 PM
yes, the "last" key is "b" now
pege63
12-11-2007, 08:10 PM
Que?
The last key is witch key?
In keyedit the FAV button Was the "b" letter.
So how can i get the B letter now witch key is/has the "b" now?
mjn
12-11-2007, 08:13 PM
angles .........
tried all of your suggestion but it doesn't work for me :frown:
angles
12-11-2007, 08:56 PM
I dont understand that. :frown:

You can try one more thing: restet (factory settings) the box after flashing with the 41er firmware, but dont forget to save your settings first.

then key reset and then well, then it should work.

Is the AU funktion working for Premiere and SF (swiss) channels?

I blieve you know the vantage forum? I read somewhere there, that some boxes out of now reasons act strange like yours.

I wish you the best, maybe you can still fix it.
pege63
12-11-2007, 10:23 PM
mjn some time it helps if you first flash with origin FW then the patched one
mjn
22-11-2007, 06:14 PM
I still have the same problem with v42 firmware. I have wo recievers and both fail to AU on TPS. Premiere and SRG are OK.
The loader on both receivers is 00010003 maybe this is a problem ?
angles
22-11-2007, 08:01 PM
The loader on my box is 00010004.

As page63 said, try the latest orig. FW and then the patched, one.