m-Vision and Galaxis Upgrades

[chrisspain]

all Boxes,incl. the 7000 and the old 7000hispaña have been updated at gxmax. All Boxes will work on all actual Providers, for our French and Spanish friends in autoroll mode.
So get the old boxes out of the cupboard,they just got a new life.

Chris

[zdrax]

These are great news!
Thanks

Edit
-----

Any idea on what program to use to update the stb?

[artware]

These are great news!
Thanks

Edit
-----

Any idea on what program to use to update the stb?

use mvision utils 2.02

this program also can be found on max:D

[zdrax]

use mvision utils 2.02

this program also can be found on max:D

Thanks a lot, mate.

[fredie]

I have the old fcis 7000, how do I update please?

Thanks.

[zdrax]

What I found out the hard way is NOT to try upgrade bootloader:frown:.

[ruthless]

could any body post an updated chanel list or the lastest factory data thanks in advance ruthless

[chrisspain]

How about simply serching channels? Takes 5 mins and you got all.

Chris

[maxhum]

When i use this upb file on a Hispanja mvision classic firm>M2.78up-MV-nl-81-fsci7000
i will need a bootloader update i think?(then it is better not to use it.)greetings

[Graham7]

I update my mvision FCIS7000 with bootloader and know I just get the red light so look like it need jtag and I am not going to do that.

[jackpot18uk]

I think if you have the original bin firmware on the 7000 you have to upgrade the bootloader first from HSMD.tv (2.55 I think)first before using upd firmware. will try an update with mine ( I have original Bin firmware on mine and will post results)

[jackpot18uk]

Had classic bin firmware on my 7000 E+, I updated bootloader first and then new firmware. works ok, I've posted bootloader update and new firmware in public uploads.

To upgrade from classic bin firmware to new upb
Connect receiver
open MvisionE+ utils
click upgrade MvisionE+ stb firmware
click update bootloader
select file 'bootloader_upgrade'
click upgrade
let it load, then wait for good
switch off and on
select firmware upgrade.
file '7000_MIB_631.upb'
click upgrade
let it load and wait for good
switch off and on

If you already have upb firmware just upgrade firmware
You will have to rescan channels and satellites after upgrade

[silversurfer]

Had classic bin firmware on my 7000 E+, I updated bootloader first and then new firmware. works ok, I've posted bootloader update and new firmware in public uploads.

To upgrade from classic bin firmware to new upb
Connect receiver
open MvisionE+ utils
click upgrade MvisionE+ stb firmware
click update bootloader
select file 'bootloader_upgrade'
click upgrade
let it load, then wait for good
switch off and on
select firmware upgrade.
file '7000_MIB_631.upb'
click upgrade
let it load and wait for good
switch off and on

If you already have upb firmware just upgrade firmware
You will have to rescan channels and satellites after upgrade

Hi Guys,

Did exactly as above on my mvision 7000 and managed to upgrade to MIB_631.upb .The only prob. is my remote no longer works to bring up the '9999' hidden menu and so 'activate' the box /caid's.I am now stuck with using the front panel to manouver round and access the relavant areas of the receiver,strange:confused:

Anyone else had same prob.? any ideas how to resolve this ???
silversurfer

[artware]

you"ll need the remote control of a E+ model

[jackpot18uk]

Not sure but does anyone know if the Hispania 7000 is the same as the M-vision 7000 ( not E+) as there is a 6.31 MIB firmware for this receiver on GXMax. This might cure the remote problem. The above firmware is for the 7000 E+ only

[ogir]

Think its the same box alright,whats with the "ko"digits on the download though?

[maxhum]

http://img137.imageshack.us/img137/6632/chipus2.png (http://imageshack.us)You can buy a new chip for old mvision to change them into E+ (+/- 15 euro).greetings

"Upgrade flashchip voor de Mvision FCIS 7000 en FS 7000 THis chip upgrade The receiver into E+ versie. then you can use the same soft for Mvision en Visionnet E+ models. easy to doo it by your self.no soldering need "

[artware]

this chip comes near the ledpanel on the front panel of this receiver

i have
jtagged an old model of mvision wich had the 2.94 upb firm on it to classic again http://www.gxmax.com/downloads/old_mvision/7000/hispania/7000.jpg so you can go to 6.31 upb,but you'll need to change the bootloader from .bin to .upb

[bazk666]

Hi Guys,

Did exactly as above on my mvision 7000 and managed to upgrade to MIB_631.upb .The only prob. is my remote no longer works to bring up the '9999' hidden menu and so 'activate' the box /caid's.I am now stuck with using the front panel to manouver round and access the relavant areas of the receiver,strange:confused:

Anyone else had same prob.? any ideas how to resolve this ???
silversurfer

silversurfer, I thought i was going made, i to have the remote problem. And after seeing the excellent interface old the old M-vision 7000 i realized that the mvision E+ remote is whats needed (I think). artware is most proberly correct. Does anyone know where on can get a (mvison 7000E+) from ?

[jackpot18uk]

silversurfer, I thought i was going made, i to have the remote problem. And after seeing the excellent interface old the old M-vision 7000 i realized that the mvision E+ remote is whats needed (I think). artware is most proberly correct. Does anyone know where on can get a (mvison 7000E+) from ?


Check PM

[bazk666]

Hi jackpot18uk,

Just called a friend who has a dead m-vision E+ 7000 & he has the remote for it, so I am going to try this out tonight after work............... thanks for the link. I will keep everybody posted on my findings tonight.

[silversurfer]

silversurfer, I thought i was going made, i to have the remote problem. And after seeing the excellent interface old the old M-vision 7000 i realized that the mvision E+ remote is whats needed (I think). artware is most proberly correct. Does anyone know where on can get a (mvison 7000E+) from ?

Hey Bazk666/Jackpot18uk,

Can you also point/pm me in the right direction for one ( mvision 7000e+ remote ) ?

Thanks for you're help,
silversurfer

[bazk666]

Hi all,

Myfriend brought round the E+ 7000 remote & blow me down with a feather. it worked excellent, but alias D+ is gone 2 nagra3 & it appears that Prem. is gone also............... sad day, but i am sure the really cleaver hackers will deal with N3 very soon. Silversurfer check your pm in 5 minutes.

[Graham7]

Prem is still working here for me on mvision FCIS7000.

[artware]

Hey Bazk666/Jackpot18uk,

Can you also point/pm me in the right direction for one ( mvision 7000e+ remote ) ?

Thanks for you're help,
silversurfer


you've got a pm:D

[fredie]

Can someone pm me a link for the remote control plaese ?

Thanks in advance.

[bazk666]

Can someone pm me a link for the remote control plaese ?

Thanks in advance.

just pm you :D