jackpot18uk
05-12-2007, 03:28 AM
For M-Vision 7000 Combo
To upgrade from classic bin firmware to new upb
Connect receiver
open MvisionE+ utils
click upgrade MvisionE+ stb firmware
click update bootloader
select file 'r2.23_FCIS_7000B_up.bin'
click upgrade
let it load, then wait for good
switch off and on
select firmware upgrade.
file '7000combo_MIB_631.upb'
click upgrade
let it load and wait for good
switch off and on
If you already have the upb firmware installed, just update the firmware
NOT TESTED.
To upgrade from classic bin firmware to new upb
Connect receiver
open MvisionE+ utils
click upgrade MvisionE+ stb firmware
click update bootloader
select file 'r2.23_FCIS_7000B_up.bin'
click upgrade
let it load, then wait for good
switch off and on
select firmware upgrade.
file '7000combo_MIB_631.upb'
click upgrade
let it load and wait for good
switch off and on
If you already have the upb firmware installed, just update the firmware
NOT TESTED.