Moving more than 1 channel at the same time

[Marco]

select a channel that you need to edit when you press menu then ToH then EPG go to settings here you have to press OK button, the channel will Highlight with Red color if you want to edit it you have to press the left arrow with remote control to get it in yellow color and now you can edit it so if you want to delete it press red button in remote, to move it press the green button after that you have to press OK and then stand-by button to confirm and save your work.

1- Menu.
2- ToH.
3- EPG.
4- Settings.
5- OK.
6- Left Arrow (Highlight in yellow).
7- Red (delete) or Green (move) and OK Button.
8- Stand-by (Save )

[sat_rrstm]

Marco m8,allow me to describe here below the whole alternative way to the usual menu-one to move or delete channels on Hummy :

one channel move procedure :
1. tune Humax on the channel to be moved
2. press 0 & EPG to get in the EPG menu (the channel line is white)
3. press OK (the ch name turns red) & left arrow (the rest of the line turns yellow)
4. scroll up or down with the arrows to go to the place you want to move the ch
5. press green button (the ch has been moved to its new position)
6. press Power button (new position saved,all menus gone and the ch is on TV screen)

multi-channel move procedure :
1. tune Humax on the first channel to be moved
2. press 0 & EPG to get in the EPG menu (the channel line is white)
3. press OK (the ch name turns red) & left arrow (the rest of the line turns yellow)
4. scroll up or down with the arrows to the next ch to be moved and when you are there,press the left arrow (the line turns yellow)
5. do the same with as many ch's as you want to move
6. when finished,scroll up or down with the arrows to go to the place you want to move all these ch's
7. press green button (the ch's have been moved to their new position)
8. press Power button (new position saved,all menus gone and the first picked ch is on TV screen)

one channel delete procedure :
1. tune Humax on the channel to be deleted
2. press 0 & EPG to get in the EPG menu (the channel line is white)
3. press OK (the ch name turns red) & left arrow (the rest of the line turns yellow)
4. press red button (the ch has been deleted,but its sound and picture are still present)
5. press Power button to save (all menus gone and the ch is still on TV screen)
6. scroll back to previous or front to next ch and you will not see the deleted ch again!

multi channel delete procedure :
1. tune Humax on the first channel to be deleted
2. press 0 & EPG to get in the EPG menu (the channel line is white)
3. press OK (the ch name turns red) & left arrow (the rest of the line turns yellow)
4. scroll up or down with the arrows to the next ch to be deleted and when you are there,press the left arrow (the line turns yellow)
5. do the same with as many ch's as you want to delete
6. press red button (the ch's have been deleted,but the first ch's sound and picture are still present)
7. press Power button to save (all menus gone and the first ch is still on TV screen)
8. scroll back to previous or front to next ch and you will not see the deleted ch's again!

All thanks to @Marco and @hawana,who helped me get it cleared!
:)

[voith driver]

hi,
both up in the help section, nice one
voith

[sat_rrstm]

@voith,m8 thanks for the honour,please recopy it and repaste it up in the stickies,since I have just made numeric order corrections on the last paragraph!
Thanks a lot!

P.S. I saw it done,thanks a lot,voith,m8!

[lonewolfe]

Very useful information there.
Thanks to all concerned.