Premiere 12070H anyone

[BIG DOG]

Can not seem to get any Premiere channels from 12070H astra . did a fresh scan
then went through all the channels but no sign as anyone else had the same problem? 9101 with ur 009 beta 2. I also did a tp scan but got no channels found any help please.

[raul]

any help please.

are you looking for someone to climb up your roof ? :)

bad signal = bad dish aligment , too small dish , cheap lnb , messy cables .

[drpaulos]

I have never had any problems with my TM9100 on 12.070H. I used to use UR9B2, using Juliet6 at the moment. This is into an 80cm dish with 0.3db LNB in SE England.

DrPaulos

[xanadu]

I had problems with no signal on all Premiere transponders this week, and narrowed the problem to the LNB.

Climbed the ladder to find my Invacom C120 LNB and feedhorn full of water.

Now using my old Alps 0.7dB twin which works very well.

[BIG DOG]

No bad signal here with my well aligment 1.4 prime focus dish with c120 lnb. Drpaulos can you please tell me how its named in your channel list. Thanks

[drpaulos]

I don't know what you mean Big Dog. It shows as 12.070H 27500 3/4. The channels are named such as Hit24 and Premiere Start.

DrPaulos

[BIG DOG]

I`am looking for the blue ones

[echelon]

https://www.satpimps.co.uk/showthread.php?t=58274 has all the details

on a 9100 you normally use the portal and access the channels through a coloured button , sometimes the red one , or you can use the direct pids for the channels instead

[drpaulos]

On Juliet6 go to Erotik ab 18, and press the Green button for the sub channels. As echelon says, Red button for UR9b2.

DrPaulos

[madsod]

same on all linux stb . how many time do we have to write this , should be a sticky ....

[Antony]

The blue channels are named "TV 1- 5 12070 Astra ". I get all stations on this frequency perfectly on TM 1500 (79% signal strength) but on my Humax patched 5400 the same blue channels - and only them - come up as absolutely blank screens. Heimat, Classica Hit 24,etc , are all Okay. Both the TM 1500 and the Humax are fed by the same twin LNB so I do not think the problem is connected with dish alignment, more likely the Humax ,which is a fairly old model may somehow be basically incompatible or is made so deliberately in the transmission. The above applies equally to Diablo and Dragon.