db 500s help

[DIMPS]

can anyone please help tried to update box through ethernet port got to about 82% then bloody pc switched of .box powers up green light but thats it tried 2 connect with port but no good is the box dead or can it be flashed through com port manny thanks paul:eek:

[bluenose50]

just use dreamup to reload image

[aslat]

Lesson to be learnt here...

Never flash a new image using the network coz if you lose data packets the it can become corrupt..

Flashing of images should always be done using a null-modem cable. Although, it's a lot slower, it's safer...

As Bluenose said, re-flash using Dreamup..but this time use a null-modem cable

[DIMPS]

cheers m8 an a good warning to all null-modem it is

[aslat]

So did you manage with a null modem cable?

Did you use Dreamup to re-flash?

[DIMPS]

Yes M8 Dream Up Top Stuff No For The Hard Bit Putting In Chan List Plus The K.. Files Manny Thanks

[kennyboy]

ive learnt it is always best to erase 1st then upload image with null dreamup 500 works great

[DIMPS]

hi ive got the box up runing ok but have a prob set it to work with 2 lnb 19 east an 28.2 sly but can not get a full channel scan on both sats only 100 chans on 19 an 130 on sly have i got big prob or can some one tell me the way to enter a full cannel list for the 2 satso

[DIMPS]

ps can get all channels with my hdci 2000 no prob so i no dish is in line thanks paul

[aslat]

Just upload the latest channel settings

I use Pet123

[DIMPS]

Hi Have Tried That But Still No Channels From 10817 Up More The Middle Freq Not Picking Up .have Read It Could Be Tunner Problem Is It A Easy Diy To Do. Ok With Soldering Iron Have Fixed Many A Boken Drag Cam Does Any One No What Parts To Change Cheers For The Reply Aslat An Merry Xmas To One An All At Satpimps