Where are the 500s satellite positions stored?

[badflyer]

Hi all, As per title, in which file does the Dreambox 500s write it's stored satellite positions once "store" is pressed on the remote?

Also is it possible to change the east/west limits? at the moment my STAB-HH120 motor won't turn further east than 40E? thanks

[J700]

The satellite descriptions are stored in /var/tuxbox/config/enigma/config
It just stores the satellite names and according rotor memory numbers.
The rotor stores the actuator position ( unless gotoXX is used).
Channels are stored in /var/tuxbox/config/enigma/services
East/West limits should be adjusted on the rotor, see rotors' manual.

[echelon]

the stab motor can have limits preset into its memory and these can be reset on certain receivers by using the RECACULATION OF SATELLITES command on certain receivers , and also disabling of the limits as well

page 10 and 11 of the stab manual tell you this

therefore , the correct question is:-

how does he do the reset and recalculation function on a dreambox in order to reset or remove the stored limits on his stab motor ?

in other words he needs to know if a dreambox can reset those stab motor limits back to factory defaults from the stored limit he has at present ( page 11 in the stab manual )

I know this as a samsung 9500 can do it as I used to do this with my old sammy and my old stab 120 motor myself