channel list for 1600 2ci??

[gman]

howdy?!

have been told that alot of firmware/ software for the tm 1000 series isn't compatible with the 1600, is this true???

i'm after a channel list for a motorised set up. am i good to use the ones posted on satpimps???

also, one last thing, before i load a channel list into the box, do i have to delete all the channels currently stored on the box before hand???

thanks in advance ;)

[echelon]

what you should do first is backup your box channel list onto your pc so you can always go back to it later if you need to

the 1000 series are compatible with each other so you can use a 1000 , or a 1500 or a 1600 channel list
installing a new list overwrites the previous list

its the same v1.87 darkman loader for all 3 boxes above ( dont use an earlier one or a technomate one )

its the same tm softcam for all these 3 models ( kempa82 tm softcam )

use the clarke tech editor for editing channels on your pc etc

and dont use the tps bin file tab at all or you will corrupt the flash on your box and would have to start from scratch

[gman]

thanks echelon, everything i need to know in one speedy reply!!

have already dowloaded the stuff you mentioned but just wanted to double check before i started to mess about with it!

xheers mate & merry christmas!!

[satpaul]

My list works fine its in the Technomate 1000 tools and editors here's the link

https://www.satpimps.co.uk/showthread.php?t=76165

[gman]

i'm using the clarketech editor with your channel list (satpaul). i'm assuming the channels with the ticks in the boxes will be downloaded to the box, how do you actually tick/ untick the boxes???

[gman]

ignore me, sussed it now!!!!

[TonyO]

h**p://rapidshare.com/files/75886974/TM1000-1500_Motorised_11-12-07.zip

[satpaul]

Theres a newer one so I deleted the old one look in the channel list section