PDA

View Full Version : New Satlinux



Keano
30-12-2007, 11:42 AM
Guys I have been using satlinux image in flash for a while now and have just upgraded to their new image.

Using it for a hour now with no problem and the aspect ratio problem looks like it is fixed.

It is only for super ( AFIAK ).

So I am not currently using anything on mmc and running box with image in flash only.

Only downside is no emus or emu manager, so i just ftp cccam to box and telnet start.

The default skin is a bit crap so changed to carbon and everything spot on now.

I've posted it below

cheers

Forgot to say you have to put it in /tmp and manual update from expert menu and then do a factory reset.

Keano
30-12-2007, 11:49 AM
Here is the fix list.

1. Audio Vol. level increase
2. System memory increase(TGS100 (27Mbyte-> 31Mbyte) TGS110(59M -> 61Mbyte)
3. Wide TV Switching bug fixed(16:9 mode & always 16:9 bug fixed)
4. NTSC <-> PAL bug fixed
5. SUB Service bug fixed
6. Audio Track selection menu bug fixed(alter. Audio)
7. EPG mem leak bug fixed
8. EPG list speed improved
9. EPG info bar & button speed improved
10. PVR Recording Bug fixed
11. VCR Switching bug fixed
12. Reboot hang up bug fixed
13. DHCP improved
14. Net driver register API bug fixed and added( Multicast API)

traveller
30-12-2007, 12:21 PM
Thanks for the info I will give it a try when I get time.

nml
31-12-2007, 12:08 AM
Well here we go took the plunge renamed 9101 image to 9100 and did a manual update in a 9100 IT WORKS!!!!!.

Please note I DO NOT RECOMMEND THIS i do have a jtag cable.

Anyway looks good so far but 16.9-4.3 bug not fixed it is the closest we have been yet straight forwards 16.9 and 4.3 channels do switch but if you have a channel in a hybrid format that is between 16.9 and 4.3 ie ITV1 but should be displayed in 16.9 it displays in 4.3 .

But it is the closest yet.


nml

Keano
31-12-2007, 05:22 PM
one thing I have found with it that is no good, if you reboot box or leave in standby for a while you lose sat positions.

Then trying to find them again the motor moves right pass them even though you stop on the rc, hang on just found out that if you find one sat at one at a time then its ok.