RVGold 7 & Problem

[qubito]

Just installed RVG 7, switched off and on again...installed latest RAM.bin but not clearing D*gi.tv or anything else. Went to menu and turned everything on but still nothing. :mad:

Went back to RVG 6.9 and everything now working ok. :D

Anyone else having this problem?

[goran]

Not me. Working great!

Kill at the back and leave for 2 mins.

Switch on and put the RG7.

Switch on and go to EMU Menu -> RESET MENU.

Switch on and put on any DigiTV or Premiere or Polsat - AU is working.

So is TPS or SRG!

Enjoy!:)

[qubito]

Cheers Goran, did exactly as you said and...all working now. :D

[goran]

TPS AU PROBLEM WITH TPS [thanx to people from Papagen's!!]:

Slimane:


Today the 10th of February, channels on frequency 10873 are on viaccess 2.3, so you can't get the AU. This is what to do to get it work again.

- Open DSRStudio and click on read.
- Save your ram.bin file.
- Go to viaccess tab and delete key Key 08 in provider 007C00.
- Now click on write to send the ram.bin to sammy.
- Go to one of the channels on 10873 (France 4 - France 5 - ushuaia M6 Music ...)
- Wait for about 20 seconds, you will see numbers flickering on sammy lcd panel; it means the AU was done successfully.
- Now open your saved ram.bin file with DSRStudio containing key 08 and send it to sammy.

all channels are working again

Maumixio:


All channels on freq. 10873 are encrypted in Viaccess1. The other channels are encrypted in Viaccess 2.5 + tpscrypt3, you can have cleared these for a couple of minutes sometimes when temporary switched in Via1. Key 08 mentioned works in Viaccess1. Full stop.

Samotek:


you can do the same without the computer:

- go to emu menu ("0" and very fast "menu")
- go down to "key editor"
- go to "viaccess"
- go to ident "007C00" and press right row button
- go down to opkey: 08
- write and remember numbers and letters on a piece of paper.
- delete now key 08 by pressing red button.
- close menu by pressing exit sometimes to come back to normal tv picture.

Now TPS is dark. go now to France 4 or other station on 10872 (10873)
wait until led's are flickering. AU is done.

go again in viaccess menu how describe befor to key 08 in ident 007C00
rewrite the key you delete before:

press sometimes exit until tv picture is back. Now TPS and Multiv* works perfect

thank to slimane