Help Using Keybin - Humax 5400

[billyreh]

Just wondered if you could give me a little hand with updating my Humax with latest keybin.

For education purposes I am trying to clear Free Delight I have download the latest keybin and DSR 9500 EMU Ed56_CW but does matter how many times I try I just cant clear it. I did it once about month ago since then I cant do it.

A little would be appreciated.

Regards

Billy

[ripley]

billyreh,make sure you select card+emu+s in the caid preselect ,you should be ok then,ok here at the moment,ripley

[sat_rrstm]

Here are a few more details to check :
Do you have the 3.4_10.2 fw on?
If yes,do you use the included PMCTable,or have you added another one afterwards?
If you have,you should check if that PMCT includes Viaccess prvd id 0244.
Can you check in your Ram Editor,using the remote,if there is already one more biss key-line on the list,starting with 2A66 AD96 and a different key than the latest valid one,standing before this valid key-line?
If yes,you should delete it,or replace its key value with the latest one,without having to add the new key-line.
On Config ToH-menu have you selected CARD+EMU?
Do you clear the other available biss or on DCW ch's?
These are the mainest details coming on my mind,so start checking and good luck!...

[billyreh]

All sorted thanks guys it was the CARD+EMU that wasnt selected. Can you tell me does the DWC change regular or does it last for a while.

Thanks for all your help

Regards

billy

[sat_rrstm]

The dcw solution usually lasts a few minutes or hours,but it can last a few days ocasionaly,and this happens often with InXtc!
Enjoy it as long as it lasts...

[charlie123]

Sorry guys, l looked at the advice above, lve tried clearing this but to no avail.
using 3.4 TOH 10.2
using the latest bin file
using the Xamuh PMCT - posted in the stickies.
Used EMU+ card and then EMU+Card+S

still no joy...

any help would be gratefully appreciated
thanks

[fishermanphil]

Charlie123

did you up load in a right order? I do my bin file last, try it?

phil

[charlie123]

yes, bin was last....

l just listed wat l had done, in no particular order, but l do follow the correct procedure, in that the bin is always last

thanks

[fishermanphil]

what about new setting? Charlie

[charlie123]

just about to try one soon, thanks Phil

[charlie123]

tried a new channel setting, but still cant clear it.
Used DSR 9500 EMU Ed56_CW to send Humax latest Key.bin
Do l need to do anything with the latest key.bin when l load this into the Humax?
Do l need to click the Viacess Button?
In the Ram Editor, it says Provider 00 1C 10 - but all fields are zeros. And looking at the key.bin under this ident, there are no keys present.

any other guidance would be appreciated,
thanks

[fishermanphil]

charlie
after settings, check new bin file again, as you saying no keys in the ram editor, check again set card+ emu, if all that in place, than go to france 4 , wait a minute or two before it clear, good luck.
phil

[charlie123]

france 4 cleared, placed onto INXTV - but this didnt clear..

this aint gonna work for me

[fishermanphil]

charlie
yesterday TPS didn't for me either, so you are not to blame, there is a new BIN out today, if you try that m8

phil

[charlie123]

thanks for your help Phil,
Still no luck lm afraid,

Am l being stupid, is there something lm missing here.....do you have to do anything special with the key.bin since it contains the DCW for this channel

[fishermanphil]

hi Charlie

there is new HOT patch 10.3 is out, load that you should solved your problem m8.

phil

[charlie123]

10.3 didnt work for me either Phil, l think l will just give up on trying to get INXTV to clear

[fishermanphil]

charlie

new HOT 10.4 is out now, i have not try it yet, you are right the patch 10.3 didn't work with mulitivision, but some channel did clear. on the bright side, the premier works well.

keep on trying m8, don't cost to nothing.

phil