digitv

[umgum]

what is working and how do you get it to work
i have the latest patch and key.bin

[seti]

DigiTV working OK with toh 10.3 for me on 5400,

I have key which start with 3A 31, also have put Nagra2 AU to OFF, Card + Emu.
(got this key in 00 and 01 so dont know which is working)

Don't know if this helps..

[M30642]

DigiTV working OK with

[umgum]

what channels are working is it just one

[sat_rrstm]

@umgum mate,what exactly would you like to make clear?
Your thread title is "digitv",meaning the Romanian package on Intelsat10-2 on 1' W,am I right?

[umgum]

think so yes the latest toh says digitv au fix but i cannot clear any channels on digitv at all

[sat_rrstm]

Did you set Nagra option to AUTO while on CARD+EMU and the Card Blocker option to EMM and then waited on any Digi TV channel for about 2-3 minutes?

[umgum]

all set as you mentioned what channel is best to leave it on

[sat_rrstm]

Any channel would do,I do not use any particular.

[HD1080]

It may be something to do with them adding Nagra 3 to the encryption

[sat_rrstm]

It may be something to do with them adding Nagra 3 to the encryption
Do you mean you also have problems with the package clearing?
Everything's fine here with Digi TV.

[umgum]

still no joy for me got it as was said
nagra auto
card blocker emm
card+emu :confused:

[luis]

A new PMC table might help.

[sat_rrstm]

I do not thing so,Digi pack is encrypted only in nagra,so it is not a PMCT matter.

[umgum]

everything else works fine tps,premier

[ALIBE]

Digi TV is auto-updating with false keys.

Turn Nagra Auto-Updating off in Config menu and then reload up-to-date Key bin file.

[steviejb]

Agreed, latest key.bin should do it, with nagra au turned off

[sat_rrstm]

Objections guys!I did test Digi TV AU with nagra option to AUTO and after setting package keys to FFFFF... value,AU kicked in after 45 seconds!
AUTO option is better than ON,because when correct keys are found the AU function stops running,so no false keys pop up after 3-4 minutes,as it happens on AU option to ON.

[ALIBE]

The results that I get using the auto-update set to Auto are as follows:

Delete all Digi TV keys to force update
00:6F738FFB29178AB1 01:22B33934BB68E389
02:3A3128E284D4A09B 03:A7C57936F66F83BD - False Key

Delete Key 01 (slots 2/3) to force update
00:6F738FFB29178AB1 01:22B33934BB68E389
02:3A3128E284D5A09B 03:64A0358221B27B08 - Correct Key

So it would appear that sat_rrstm is both right and wrong.
Does this happen with anybody else. If so, the answer would seem to be to delete the old key from the active key slot only and then auto-update using the "Auto" setting.

[kemo]

There is a new official 10.4 out, perhaps this will sort things.............

[umgum]

still nothing maybe it is pmct i need which is best

[luis]

Have you tried this:

CAID Preselect: CARD+EMU
Card Blocker: OFF
Nagra2AU: OFF

Then enter the working key in Ram Editor with remote.
Channels will not AU, but since the keys are not changing so often, it´s not a problem to enter then manually.

[umgum]

if i open parser and select ECM-DW i get FTA channel or not decrypted through +cam

[luis]

Select Ram Editor, not ECM-DW. Then select NAGRAVISION (yellow button), Provider 2111 (DigiTV), then enter key 00 into key lines 00 and 01, or key 01 into key lines 02 and 03.

[umgum]

also where the encryption symbol is all it gives me is an x

[umgum]

Have you tried this:

CAID Preselect: CARD+EMU
Card Blocker: OFF
Nagra2AU: OFF

Then enter the working key in Ram Editor with remote.
Channels will not AU, but since the keys are not changing so often, it´s not a problem to enter then manually.


won`t let me select key to change it no 00 01 02 03

[luis]

Just to make sure you are doing it right: have you ever entered the keys into Ram Editor before? Did it work, did channels clear then? If not, I´ll explain again, step by step. However, DigiTV should clear after you load the latest key.bin only.

[umgum]

never loaded keys and never had it workin i have latest keybin from mach1 site and latest firmware
when i go to edit keys manualy there are no key lines to edit
i do know how to edit keys

[luis]

OK m8, here we go:

I understand you have Catone software (which serves to manually upload keys to Humax), already loaded to your Humax.
Open the menu > ToH > Parser > Ram Editor. A table shows up. Press the yellow button on your remote for nagra encrypted providers. There are three lines in the upper left window. If Humax is switched on DigiTV channel, the first line should read NAGRAVISION, the middle (Provider) 21 11, and the bottom DigiTV. If not, keep pressing the "up" cursor and highlight the middle line. Keep pressing the right cursor until 21 11 appears.
Now move your "down" cursor down and highlight the key line 02 (DigiTV 01 key is active at the moment, so you must enter this key, which you find in nagra key section, in key line 02 (the first 8 codes of the key) and key line 03 (the last 8 codes). After you highlighted line 02, pres OK and the window to enter the first half of the key appears. To enter the letters of the hex key press:
for A: mute button (the third one down on top right)
B: red button
C: green button
D: yellow button
E: blue button
F: white button

After you completed entering the first half of the key 01, press OK on remote and you can see this key in the line 02 where it should be.
Then highlight the line 03 and enter the same way the second half of the key 01, press OK and you can see it in the key line 03. Job done. Wait some 10 seconds and if everything else is right, the channel should clear.

When key 00 is active, do the same thing but enter the key in the key lines 00 and 01.

[umgum]

sorry luis bottle of wine got the better of me
i read your post wrong yes i have used ram editor before
but not for didgitv
it`s digitv i have never had working before

[sat_rrstm]

also where the encryption symbol is all it gives me is an x
You have to make sure that you are on the digi TV package.The symbol X stands for Conax encryption,which has nothing to do with digi TV on Intelsat 10-02 (1.0°W).
You can check the package frequencies and channels here : http://www.lyngsat.com/packages/digi.html (http://www.lyngsat.com/packages/digi.html) to make sure if you are on the right place.

[umgum]

what is the actual package called the one i`m looking at is called focus sat
i don`t have a package called digitv
but focus sat has all the channels on digitv
antena3
sport.ro
pro tv
minimax
animal planet

[raul]

the package is called rcs on intelsat .
you are looking at another romanian package on thor encrypted in cnx !

ever heard of lyngsat :)

_http://www.lyngsat.com/packages/digi.html

[sat_rrstm]

what is the actual package called the one i`m looking at is called focus sat
i don`t have a package called digitv
but focus sat has all the channels on digitv
antena3
sport.ro
pro tv
minimax
animal planet
So that explains your troubles!
The package you are trying to hack is Focus Sat on Thor 3 at 0.8°W and it is Conax encrypted and never hacked and the freq's & ch's are here : http://www.lyngsat.com/packages/focus.html .
You can forget this pack,try with Digi TV instead...

[umgum]

i do not have one named digitv in my list

[chrishellis]

@ umgum

i use BBC world to locate the satellite @ 1 west @ 11325 h 24500 7/8 as this is the strongest signal from this Bird for me in my location - strenght around 65% - but Digi TV reception is a lot weaker where i live @ around
30 - 35% on a good day

One frequency used by Digi TV ( RCS DIGI TV) --> 12723 H 27500 3/4

rgds
chris

[umgum]

i have latest patch latest keybin and pmct

[umgum]

@ umgum

i use BBC world to locate the satellite @ 1 west @ 11325 h 24500 7/8 as this is the strongest signal from this satellite for me in my location - strenght around 65% - but Digi TV reception is a lot weaker where i live around
30 - 35% on a good day

One frequency used by Digi TV ( RCS DIGI TV) --> 12723 H 27500 3/4

rgds
chris

i can get thor no problem when i go to search channels tells me there is no space left think it might be time for a spring clean

[raul]

it's not about what you have in your emu , it's about the thing that you are trying WRONG provider , since you probably have no or weak signal on intelsat !

[umgum]

the package is called rcs on intelsat .
you are looking at another romanian package on thor encrypted in cnx !

ever heard of lyngsat :)

_http://www.lyngsat.com/packages/digi.html

yes i have heard of lyngsat but when you have the same channels as people are telling you you should have then you just assume that its the right one

[umgum]

it's not about what you have in your emu , it's about the thing that you are trying WRONG provider , since you probably have no or weak signal on intelsat !
i can search digitv and get channels but the sevice limit is reached

[raul]

well then case closed :D

digitv = intelsat 1.0W n2 hacked !
focusat = thor 0.8W cnx NOT hacked !
your receiver = fooked up !

[sat_rrstm]

i can search digitv and get channels but the sevice limit is reached
I don't think you can clear or that you need all 4000 ch's on your receiver.It is worthy to delete 140 useless other ch's and replace them with Digi TV package ch's available...
Go for it!

[umgum]

well then case closed :D

digitv = intelsat 1.0W n2 hacked !
focusat = thor 0.8W cnx NOT hacked !
your receiver = fooked up !
how can case be closed
when problem not solved

[umgum]

now really doing my swede in
now i know what i`m looking for i have deleted some channels and
have done a scan but it`s only coming up with 13 channels
most of them are sw dl
the only one thats clear is digitvinfo
i have about 30% signal and 50% quality

[sat_rrstm]

Here's a last desperate tip for you,dear @umgum :
At first you go here http://www.lyngsat.com/packages/digi.html and check how many the Digi TV-pack ch's are and then delete from your Humax as many as needed.Now you can make a manual scan for every Digi TV transponder and then check if your Humax can clear them or not and why...

[umgum]

@sat_rrstm

cheers for your help m8
i got it sorted in the end wouldn`t scan any encrypted channels for some reason so i stripped it all down and started again new pet settings reloaded keybin
all working fine now cheers again

[sat_rrstm]

Thank God,it's over!
I am very very very glad!
Cheers!

[umgum]

we can all sleep at night now lol

[sat_rrstm]

We all yes,but not you!
You have just cleared 140 more (Digi) channels,so you have to stay up all night long,watching them!....he he he!!!...