Channel 4 FTV on humax problem

[0c71]

Hello
Channel 4 seems to be FTV on my rescanned fly box on channel 8350, not subscribed at all, on 10729 V 22000 5/6. How do I add it to my existing settings without doing a rescan as I havent any room for the thousands of fly channels. I have tried to edit Voiths moded settings but never get far.
Thanks
0c71

[voith driver]

hi oc71,
make my brain hurt why don't you:D

the lazy way.

press
menu, yellow yellow (so your in the left side of the page) choose astra/euro
then select film4+1
exit
menu
toh
epg
settings (you will find film4 highlighted)
ok (the name will be in red)
right, change chid to 8350 (use the up arrow and change the digits one by one)
right, 0 (zero)
right 0 (zero)
right 0 (zero)
right 267 (pmt)

ok

the name should change to 8350 but i expect you can live with that

exit

you should be watching channel 4.

this survives a power down so it should be fixed

all the best

voith

this method uses an existing unwanted channel on the same freq so it does not interfere with the channel count

[0c71]

Sorry about your brain Voith
Yes that did the job fine although I did lose 4+1 but rather have channel4. I will do an upload sometime and have a fiddle with that.
Thanks
0c71

[voith driver]

hi oc71,
sorry m8, i just chose that channel as it being a +1 channel it was less likely to be wanted, you can do it on any other channel that you do not want, just change the relevant details.
you can do it in the editor also, but this way is more direct
all the best
voith