PDA

View Full Version : Update and *** viw fix



diavolo
18-04-2008, 03:36 AM
1. New SW attached
What is improvement at this version!
****** For downloading success, first update Boot via USB firstly. Boot updating procedure. MENU --> USB --> Selecting Mboot.bin --> OK --> Rebooting.

A) RS 232 Download tool (Serial Download via RS232) : Herein attached the download tool ( gtrom )

** PC to STB serial download.

1) Pls kindly double-cilck GTROM and execute it. After that, Press Browse and select the file to download and finally press download.
2) While STB AC Power Off/On, keep pressing Power button on the Front until dnLd will be displayed on the LED.
3) LED will be counted. SUCC will be displayed if the downloading will be complete.
4) Burn will be displayed and then Flash Writing.
5) Pls wait until STB rebooting.

B) Set-to-set Download: Herein attached download instruction.
** STB1 to STB2 download.
1) While STB 2 AC Power Off/on, keep pressing power button on the Front until dnLd will be displayed.
2) While STB 1 AC Power Off/On, keep pressing select(Boot) or EXIT(API) or MENU(CH) until uPld will be displayed on the LED.
3) LED will be counted.
4) When the downloading will be complete, STB 1 shows END and STB 2 writing Flash.
5) Pls wait until STB 2 rebooting.
C) Add language (Polish, Holland, Czech language):
D) Biss-Softkey upgrade (When inputting key data, If the Provider ID is same, different input of the key num makes the key operated automatically in accordance with the corresponding ch.)
E) E_SW Hidden menu: Normal mode - > if you press ¡° 8888¡± in the menu mode you can go ¡°edit menu ¡°
F) Signal level Improve when you connect signal:
G) Antenna setting de-bugging and Improve:
H) ***view Add
I ) DVcrypt card include
J) Improvement stability