Dead TM6900

[obibatk]

Hello techies, can someone please help!!!
I updated my TM6900 with the latest software TM6900HD_64.stb After the system reboot, I used DM patch DarkmanPatch _05-01-2008-TM6900HD_626p.stb.
Now the receiver only shows Technomate with no display on the tele.
It does not come and would not even respond to commands from the remote control.
Can anyone help me to reset it to the factory settings.
Please!!!

[budd131]

softwere prob need to load eairlier firmwere back in start downloading with box turned off for a few seconds then turn it on at back of box use differnt patch i had prbs with this 1 cheers :respect-047:

[obibatk]

Can I use the USB to update even if the box is switched off?

[obibatk]

Can I use the USB pendrive to upload an older firmware even if the box is turned off?

[Aldo]

Hi M8

Go here and get the Bootload file:

_http://www.technomate.com/software_updates.php?model=TM-6900+HD+COMBO

# Download this software only by RS-232 (Null modem cable) if your receiver does not boot up. Then download the latest software.

Then load the latest patch and a channel list.

[echelon]

Can I use the USB to update even if the box is switched off?


Can I use the USB pendrive to upload an older firmware even if the box is turned off?

no

you must use the tm loader and a null modem cable from your pc to the serial port on the back of the box , and use the forced download procedure to update the box from a switch on

[richard@rj]

hi m8,i;m having the same prob.with my tm 6900,can anyone tell me what is the forced download procedure and where do i find it

[Aldo]

hi m8,i;m having the same prob.with my tm 6900,can anyone tell me what is the forced download procedure and where do i find it

Hi M8

Did you read post #5

[echelon]

hi m8,i;m having the same prob.with my tm 6900,can anyone tell me what is the forced download procedure and where do i find it

https://www.satpimps.co.uk/showthread.php?t=58273 post 8

just use the tm6900 or whichever is the correct one for your receiver