How do I input new sats into list

[ahmet-50]

Hi all, :respect-055:

I've got a TM 6900combo+ HD. On my sat list I don't have 9*East I have tried to enter it in but no luck can anybody help please? :001_07:

Regards ahmet-50 :champion-018:

TM 6900 COMBO+ HD;1.1 Triax; 0.3 Invacom 4 port LNB; Sky+ HD;T-REX 4.6; Diablo 2.3; and loadsa ice scrapers! :party:

[mickandsue]

if you goto 10E it will pull everything in on 9E.
hope this helps.

[fanjo]

In Sat Setup - rename satellite
add 9E on next line
exit and save.
then do an auto blind search (Green Button) and the transponders will be added.
If you get the 0.00 stuck on blind search, your memory hass too many transponders and is full. You need to delete a few transponders from Sats you don't use. This will clear memory up.
Good Luck.

[ahmet-50]

Thanx m8,:respect-055:

Your advice makes a lot of sense now! I'll try that when I get home.:respect-010:

I will also rescan 10* East maybe that will pull the others in then it will save me mucking about.:respect-040:

Regards ahmet-50:champion-018:

[holmroad]

Yes try selecting 10E by all means, but if your system is REALLY set up right it SHOULDNT really pull in 9E too - otherwise the same argument would apply to all the other satellites too eh?
Its your SETTINGS which really need checking!:respect-051:

[ahmet-50]

Hi guyz,:respect-055:

Just sorted it out added 9*E tranponders to the 10*E sat then scanned them in and hey presto! They are there.

So thanks to all the peeps for their input.:respect-040:

Also thanx for the info Holmrod m8 when I get some more free time I'll investigate the settings:bravo-009:

Regards ahmet-50:D