Andrew007
23-07-2008, 04:26 PM
Hi Guys..
just a little pointer How to Edit the Keys in Biss Section:
First GO to the Channel you want to View:
For this example let's use this one:
MBC Int; Freq. 11919 H; 26 East
2600 : 001B : 12 xx xx xx xx xx xx 36
2600 : 01AB : 12 xx xx xx xx xx xx 36
Enter the Menu > Module > Emu Key..press OK.
Now keep pressing the Blue Button until you reach BISS..
it appears after ChinaCrypt..sometimes this has to Activate itself so wait a moment..you should see a Screen saying " Saving Data..." or something to that effect..!
Now just wait a moment until the BISS Section opens up..!!
Now Scroll through the List to the bottom and Search out this:
Freq ~ 11919/27500 Hor ..
As far as I can see it's already there..
BUT its in the wrong Symbol Rate.. VER ...
SO just press OK on it and Enter the "Edit Cas Key" Menu...now Scroll down and Change the VER to HOR and then the RED BUTTON to SAVE .
You will then be Informed that this Action will Delete/Override all the Channels for this Transponder and you will have to Re-scan this one again...
Do this.. it only takes a minute to Re-Scan
You can perform this action for ALL your BISS keys..EDIT the Keys..INSERT provider etc...
IF the Provider you want to EDIT or INSERT is NOT there or NOT listed just INSERT them onto the List using this procedure..
And instead of EDITING use the INSERT Function.
Always finish the procedure with SAVE (the Red Button).
Enjoy.:respect-048:
Cheers
Andrew
just a little pointer How to Edit the Keys in Biss Section:
First GO to the Channel you want to View:
For this example let's use this one:
MBC Int; Freq. 11919 H; 26 East
2600 : 001B : 12 xx xx xx xx xx xx 36
2600 : 01AB : 12 xx xx xx xx xx xx 36
Enter the Menu > Module > Emu Key..press OK.
Now keep pressing the Blue Button until you reach BISS..
it appears after ChinaCrypt..sometimes this has to Activate itself so wait a moment..you should see a Screen saying " Saving Data..." or something to that effect..!
Now just wait a moment until the BISS Section opens up..!!
Now Scroll through the List to the bottom and Search out this:
Freq ~ 11919/27500 Hor ..
As far as I can see it's already there..
BUT its in the wrong Symbol Rate.. VER ...
SO just press OK on it and Enter the "Edit Cas Key" Menu...now Scroll down and Change the VER to HOR and then the RED BUTTON to SAVE .
You will then be Informed that this Action will Delete/Override all the Channels for this Transponder and you will have to Re-scan this one again...
Do this.. it only takes a minute to Re-Scan
You can perform this action for ALL your BISS keys..EDIT the Keys..INSERT provider etc...
IF the Provider you want to EDIT or INSERT is NOT there or NOT listed just INSERT them onto the List using this procedure..
And instead of EDITING use the INSERT Function.
Always finish the procedure with SAVE (the Red Button).
Enjoy.:respect-048:
Cheers
Andrew