Euro 1080 HD1

[dwevans]

Using a Humax HDCI2000, latest firmware (version 100.16?) Dragon cam and Irdeto cam, I cannot clear HD1. Ive been on the Euro1080 website, done the card reset, no joy.
I notice they have a software download for Humax receivers but this is version 100.11, clearly a step down from the latest. Is this going to solve my problem and if I load it up will the rest of the receivers performance be affected, I would imagine that I'd loose all the enhancements of the latest software version!

[Dave5118]

In the past when I've done a card reset, it usually takes a few hours to catch the update. I would recommend using the Irdeto cam. It shouldn't matter too much what firmware you have in your receiver if you are using a cam....but you can't rule it out :eek:

ps. I've only ever done this on a mpeg2 receiver, so have no experience of mpeg4 receivers.

[Tony Baker]

Hi DW, I presume you're using a Euro1080 card? I have a HDCI:2000 and use the 1080 Euro card but in a "PowerCam:Pro".
However, if I don't watch any of the HD:1-2 or 5 Chns on 23.5E for about a couple of days then it will drop out and I have to leave it on HD:1 for 30 mins or longer to re-synch! Recently after not viewing any of the HD Chns for 10 days,- none of the HD Chns would light up at all! So I left it tuned into HD:1 overnight,- next morning it was all back to normal!