Diseqc settings

[dman]

Does anyone know the correct settings reception settings for an 800 with a polar mount dish and actuator and diseqc converter (twin universal LNB c 120) [quote]
This is my 800 setup not sure about power to LNB.
Hope its ok to post these links.
h**p://rapidshare.com/files/134591253/DSC01795.JPG (http://rapidshare.com/files/134591253/DSC01795.JPG)
h**p://rapidshare.com/files/134591492/DSC01796.JPG

[cosworth4x4]

https://www.satpimps.co.uk/showthread.php?t=90179

take a look at them , when you say diseqc converter is it a v-box type.

[dman]

Yes its a v-box type have put it on a second old fixed dish today as I am having big reception problems here and it seems to have improved so far.Think maybe my 7020 setup settings are wrong. Thanks cosworth 4x4 :respect-050:

[cosworth4x4]

ok if you add youre channel list in all you then need to do is store the sats, its far easier once the cannel list is in you can just move the dish till you get the strongest signal and store it on the vbox.

dont forget even when a channel list is in you still need to do the above and store each sat position, untill the sat is set up the vbox dosent seem to kick in and allow a signal through it.

if you can remember what numbers you used for what sats on the 7020 you can just put them in as stored position on the 800 as well.

[dman]

Thanks mate will have a go at it over the weekend.