CD 1W, all HD channels ok...

[TonyO]

just got my M2+ card and all the new HD transponders are working fine using 30,000 sr with ordinary v3.0 and 4.0 conax cams.

Which proves that it is not a cam processor speed issue but a diablo cam problem, both Eorosport HD and History HD are ratling in here.

Over to you Duolabs !

[scallywag]

Is that the M2 card in the diablo???
ps cheers for the info.

[TonyO]

it works in all the conax based cams so far, the diablo is ok below 30k but has a problem with high symbol rates it seems.

[jamsb]

Yer right Diablo has this problem,

I hope they can sort this out as well ?

[klingonworf]

just got my M2+ card and all the new HD transponders are working fine using 30,000 sr with ordinary v3.0 and 4.0 conax cams.

Which proves that it is not a cam processor speed issue but a diablo cam problem, both Eorosport HD and History HD are ratling in here.

Over to you Duolabs !

Which stb are you using? I have a Humax HDCI 2000 with Dragoncam and cannot open any HD channel with M2+ card.
Last year I had no problem to see HD with official card and I even tried the C*nal Digital official HD stb with M2+ but only get wrong card message. I bought a conax cam but got same wrong card message.
Any suggestions?

Regards
Worf

[TonyO]

it might have an allcam s/w fix but only the conax based ones seem clear high SR's with the m2+.

I only tried it this afternoon, most of my other cams did not work with the m2+, evidently blue zeta cams are also working in the conax version.

[scallywag]

Sorry Tony what I am asking does the M2 work in the diablo. Maybe with a stealth file.
If it does then the diablo should be able to be fixed.

[TonyO]

on SD only, I didn't try any HD channels as my hummy cant tune them in.

In my Passion reciever the diablo at the moment can't clear the HD sr 30,000 channels that CD are moving most of them to.

[rkbuttoo]

so does this mean if get a conax based cam ( I have dragon cam ) at the mo) and get this card conax will work inc hd as I have the TM 6800 box?

:respect-059:

[TonyO]

It seem like that at the moment, all the conax cams worked and with the HD channels at 30,000 SR.

All the HD channels are scheduled to be moved to 30K sr.

[makbar]

hi guys

i have ip9000hd , dragon cam and M2+ all the sd channels r working but no HD above.
i have tried these conax cams:-

telenor conax 2.01 failed
technicam cx failed
canal digital 1.1 failed
aston converted to 4.0e failed


so any advise appreciated

thank u

[holmroad]

Well not familiar with a ip9000hd M8 so cant comment, but all can say is that all Conax HD channels 1W open ok in TM6900HD with Conax MPEG-4 cam and TM6900HD patch switched off! They do however take a while to open compared with the SD channels, so as always PATIENCE is a virtue!:respect-069:

[makbar]

hi mate

what cam r u using ?

mine r standard not mpeg4.

[holmroad]

Using MPEG-4 cam which is available from our sponsor on Pimps M8!:respect-067:

[TonyO]

any conax cam seems to be ok with an M2+ for HD.

[cardealer]

hi mate were do ya get a m2+ card from, any help

[holmroad]

Why not ask OUR site dealer sponsors Goldwafers M8 - Lee is MEGA helpful!:respect-067:

[Chocolate]

just got my M2+ card and all the new HD transponders are working fine using 30,000 sr with ordinary v3.0 and 4.0 conax cams.

Which proves that it is not a cam processor speed issue but a diablo cam problem, both Eorosport HD and History HD are ratling in here.

Over to you Duolabs !

Hi, what do you exactly meqan by saying ordinary cams? I just ordered the Conax Technisat cam and a M2+ card, will this combination do the job for HD on 1ºW ?

Thank You

tell me please which cam exactly do you have.

[Josh]

Well it is true that you need a Conax cam to get the HD, other cams don't do this, they will give you SD but not HD and I don't reckon it's the S/R myself since on that channel with a low one it still didn't work.

It starts to get a blurr but my problems...

a. internal CT5000 cam software using 1.35 / 1.38p and 1.43p don't work although it does see the "Conax" card. So that's one to note.

Meanwhile back on my Conax Pocket dTV cam getting the HD to work 100 percent all of the time, it doesn't, we're talking about 10 percent. So anybody got any tricks ?. The H channel is always fine. SD is always fine.

Are there any good cams that always work.

As for the CT I'm currently thinking that it may be best to keep off the p versions.

My last beef is that any channel with dolby sound in HD I don't get !. Is this a cam issue, it's not the CT settings, I tried that. It's not me I get dolby HD elsewhere.

[dvdman]

I use the Giga cam green mate get all hd with m2+
thanks dvdman

[TonyO]

Chocolate, see if you can send it back and get an older v303 or more likely v4.00.

The technisat conax cx cam seems to be next to useless regarding the
M2+ card, if you allready ordered it try it first but quite a lot of peeps say it does not work.

[TonyO]

M2+ also works in an matrix reloaded v118 on SD only, I'll try all my old cams now.

(also sd only on magic and xcam)