ITV HD-changing pids on Mvision

[chopper1]

Hi all.
I have no audio on the ITV HD channel, could someone explain how i can can change the audio pid to be able to get the sound. I have the Mvision HD 200 receiver Help appreciated, thanks.
Chopper.

[dishdad]

Loading the channel list from this thread:-

https://www.satpimps.co.uk/showthread.php?t=90231&

clears both video & audio for the channel in question.

Must be said that many users, at least here in Spain, are having differing results dependant on firmware version installed.

Taken as read normally but ensure to back up your existing config before update/tests.

Another factor is the channel editing software used and again the compatability with firmware version.

'Menu/Satellite Search'....select Astra 2A-D/red button (TP Edit)/select transponder 11428/blue button (PID add)....fill in the values:-

Service ID = 2326
Video PID = 3401
Audio PID = 3402
PCR PID = 2326
CAS = On
HD Video = On
AC3 Audio = On

Then, remote control 'OK' on the line 'PID add'.

Exit.

These values work for myself.

********************************* ***************

Other working values have been entered as :-

Service ID = 0510
Video PID = 3401
Audio PID = 3402
PCR PID = 2326
CAS = On
HD Video = On
AC3 Audio = On

Then, remote control 'OK' on the line 'PID add'.

Exit.

Variations abound but as you have already seen in many threads here, lots of different receiver makes struggling to add this channel.

Best wishes.

[chopper1]

Dishdad,
many thanks, i will try this out (i am using firmware version speedy 1.23).
cheers. Finally got it sorted, thanks for all the help, just one thing is that the audio seems out of sync with the action, is this normal?.
cheers, Chopper.