no av

[sheare9]

hello can any one help some of my channels arnt working they have a blank screen an flash the letters no av,hope someone can help many thanks

[Andrew007]

sheare9
I have an old Xtreme STR with 2CI's and an onboard CA
This "NO AV " message is a known problem and when this Box was released it did NOT get the acceptance it deserved..IT was NOT very popular with the S/W Developers and only 2 S/W Versions were ever released..WITHOUT solving the problem ..and the Box Support DIED..!

The problem for this message is the S/W in the "On Board" CA which with a little Patience and JTag can be solved and RE-Flashed ...

My advice is to Re-Load the last working S/W Version..this usually solves the problem for at least 6 months then you have to do it all over again..

Or alternatively Just switch the BOX OFF and ON using the Remote..!

These two solutions are the way I keep this great little Box alive..!:respect-047:

Hope this Helps you M8y..

Cheers:001_302:
Andrew

[simford]

Andrew007,
I have the same 'old' box. Can it do any dycription of any sort. I've been away for a long time and now thinking of start my old habit!! I'd appreciate you advise. thanks

Simford

[Andrew007]

Andrew007,
I have the same 'old' box. Can it do any dycription of any sort. I've been away for a long time and now thinking of start my old habit!! I'd appreciate you advise. thanks

Simford

simford

Yes.... if you Jtag the On Board CA..
Change the Bootloader....
and then Flash with a Koan/Sunny S/W It will run with EMU..!
BUT the best and simplest solution is to LEAVE it as it IS and use any of the known Cams..
Dragon - T.Rex - T.Rex Super - Diablo ALL run with absolutely NO problem.
Hope this Helps.

Cheers:respect-048:
Andrew

[simford]

cheers mate:respect-048:

[Andrew007]

cheers mate:respect-048:

simford

No problem here to Help if I can..:respect-056:

Cheers;)
Andrew