DM800 out of Sync

[Jono]

My DM800 is ace apart from you can't watch any HD channel as the audio is always out of sync. watching football is fine as you never see mouths but tonight i put Britannia High on ITV HD i could'nt watch it was that much out of sync. is it my setting or is this the norm with thede recievers.


Jono

[webvan]

Same problem here on all HD channels, a bit better with SPIDF. Not sure if it's a DM800 problem or HD feed...

[morfsta]

Same with Humax HDCI2000 and a lot of receivers. Its unbelievable that a professionally manufactured receiver still can't get sound sync spot on with H264. All being rushed to market.

[webvan]

In that case you have to wonder whether there isn't a problem with the feeds ! Is there any known receiver that doesn't have this problem ?

Ideally these receivers would allow for some fine-tuning of the picture/voice sync, I had an old DVD player that could do that.

[Jono]

Same with Humax HDCI2000 and a lot of receivers. Its unbelievable that a professionally manufactured receiver still can't get sound sync spot on with H264. All being rushed to market.

good to hear that it is not just me but also alot of HD recievers and also the official freesat ones to.
well lets just hope one day they will get it right

jono

[karlpowell]

I have all so noticed this , with me being a little deaf i notice it more , when i mention it to the Mrs she says Its spot on .

what do woman know eh ?

karl

[webvan]

I'm noticing that on SD channels too now...anyone else ?

[stefor]

I've still got my Technomate 6900HD Super and have never had any problems with HD or SD Sync!! I've just read this post and gone through all my HD feeds and they are perfect, including BBC HD.

[x5]

no sync probs at all with my DM800 works fine in HD channels
im using nabilo tray to load the new second stage 67 it may fix that also do a image update

[karlpowell]

whats the secocond stage 67 , and how do you load it ?


EDIT :- OK i have the file .. so how do you load it ?

[x5]

just loaded like u r loadind a image into flash
dont worry it wont erase your image it will only update the second stage
this will only work on image on flash so make sure u allways use a updated image on flash even if u using other image on usb
i use ozon in flash and nabilo on usb

[webvan]

Sounds interesting, karlpowell, let us know if it helps in your case.

Just to clarify x5 , you say it only works for image on flash, but you say you don't have any delay with nabilo on USB ? I must be missing something, sorry.

[kaja008]

@x5

I use Gemini 3.8 on USB.
If I load new secondstage bootloader, will this only update image in flash?

cheers
kaja008

[Jono]

This second stage 67 what is it, is it only for use with Nabilo image or can i use it with my Gemini 3.80 image.
can you explain

Cheers Jono

[x5]

Sounds interesting, karlpowell, let us know if it helps in your case.

Just to clarify x5 , you say it only works for image on flash, but you say you don't have any delay with nabilo on USB ? I must be missing something, sorry.

its simple whem u use a updated image on flash them the image u have on usb will use the updates not all off them but most
whem u using image on usb its good to make a enigma2 update using BARRY ALLEN

1=go to barry
2=w.i.z.a.r.d for tools
3=enigma2 software update

by doing this 2 steps will help u keep your DM updated and working fine

[x5]

This second stage 67 what is it, is it only for use with Nabilo image or can i use it with my Gemini 3.80 image.
can you explain

Cheers Jono

u can use with all images as long u loaded on flash
this second stage update its to be done on the image u have on flash
even if u use another image on usb
allways keep the flash image updated

[x5]

@x5

I use Gemini 3.8 on USB.
If I load new secondstage bootloader, will this only update image in flash?

cheers
kaja008

first update your flash image with the new second stage
them u sould allways check if your gemini needs updating
go to plugin menu and run the software update plugin

[kaja008]

first update your flash image with the new second stage
them u sould allways check if your gemini needs updating
go to plugin menu and run the software update plugin
i mean how can I update ONLY USB image with new secondstage?
I use barry allen.

[x5]

i mean how can I update ONLY USB image with new secondstage?
I use barry allen.

u cant as i sayd its a flash update
this will update your bootloader

[karlpowell]

So do i ....
1 connect the dm via null modem and flash second stage 67 using dreamup .?
OR
2 connect via web interface by pressing the On/Off button webing to the DHCP IP addy and updating flash from there . ?

karl

[x5]

So do i ....
1 connect the dm via null modem and flash second stage 67 using dreamup .?
OR
2 connect via web interface by pressing the On/Off button webing to the DHCP IP addy and updating flash from there . ?

karl

for me its far better using web interface its safer and easy

[karlpowell]

thanks lads , will give it a try when i get home at 4

[webvan]

I was thinking 2 ?

[kaja008]

u cant as i sayd its a flash update
this will update your bootloader
thanks, how can I update flash with secondstage using Barry Allen?
or can it be updated only via web interface or nullmodem cable?
thanks again...

[karlpowell]

It does seem to cure it :)

[webvan]

Thanks for trying and reporting back, can't wait to give it a try myself !

[webvan]

Ok, loaded, that was fast.
Can't say I see a big change, there is still some delay, maybe a bit less, running Gemini 3.80. Will see if I can find other images to try, I have PLI with B.A.

[sllaq]

I tried to flash update (LAN and COM1) with secodstage-67 and I get the following message on dreamup 1-3-3-3-0:

Calculating Checksum......................... ................................. .......

It just hangs there and does not upload the file.

I have Gemini 3.70 installed. (no attached USB stick):

Any ideas?

Regards Sllaq

:beatdeadhorse5:

[x5]

I tried to flash update (LAN and COM1) with secodstage-67 and I get the following message on dreamup 1-3-3-3-0:

Calculating Checksum......................... ................................. .......

It just hangs there and does not upload the file.

I have Gemini 3.70 installed. (no attached USB stick):

Any ideas?

Regards Sllaq

:beatdeadhorse5:

dont know m8 never had any probs updating
tray updating your gemini to 3.8 them load the second stage

[sllaq]

Hi,

Thanks for your reply.

I tried to flash with Gem 380 and get a message that says FILE TOO BIG!

Any ideas?#

Regards
Sllaq

[x5]

how r u updating your box m8
using webif or dreamup??

[sllaq]

Using universal dreamup V1.3.3.0

[x5]

use webif
check here how to https://www.satpimps.co.uk/showthread.php?t=88357

[Jono]

will give it a go after the LFC match will it fix the ync on HD channels

Cheers Jono

well i have done it and it is still no better on HD channels mouth moves the the sound comes

lol Jono

[webvan]

same here, I have noticed that the delay appears to change slightly over time though, not sure why, but that could indicate some type of "overload".

[sllaq]

use webif
check here how to https://www.satpimps.co.uk/showthread.php?t=88357



Thanks for your help. Webif did the trick.
Regards
Sllaq:respect-040:

[kegnkiwi]

Guys you should just turn the box off and turn if back on holding the power button on the front. Flash this small file using your web browser just like you would when changing your image. It should be a small addition to the boot loader just like the one we all installed to sort out the over heating. It should not effect any image settings and it should be ok for all images on barry allen.

ki