just been given 5400z

[bishbash]

Where can i find the HU 15 loader please to put on the latest toh i have a null modem cable and think i under stand whats required to bring it to life again at the moment the card reader wont read any cards, the previous owner messed it up. thank you.

[voith driver]

hi bishbash,

https://www.satpimps.co.uk/showthread.php?t=60680

look for hdfsmart just as good, and make sure you have all the boxes ticked on the left and it would not harm to have a rummage around the help section

hope it helps
voith

voith

[grumpyy]

You'll need the card reader working because the HoT emu requires the irdeto atr from a fun, silver or gold card file etc

Have you cleaned the contacts of the card reader or tried wedging a card up a bit with some paper or thin card under it - Or is it gone completely?

[bishbash]

Hi m8's when i put a card in the reader it just says card extracted there is nothing wrong with the card/cards they are working in my dragon cam in the same box, would it be possible to give me a step by step idiot guide to bringing the box upto date. Thank you.

[bishbash]

When i try to load toh i get E-ID error it's marked on stb as 5400z and im trying to put on ToH3.4_HoT11.0_Zplus any idea's please.

[bishbash]

Sorted m8's loaded toh 11 for any 5400 then the upgrade 11.1 now the card reader reads my g*mma card no problems, great little box this.

[voith driver]

hi bishbash,
well done m8, but you had some luck, as you were putting the wrong patch in, (for the wrong model) but at least you got it going just keep reading as all the tutorials you would want are in the help section

all the best
voith