freesat channels

[mdaniels47]

hi m8s
have just bought panasonic 42 inch with freesat included.i am trying to watch astra 1,which card would i need to use and which files would enable the channels,which are encripted
thanks in advance
mike

[Burnham]

I assume you are NOT asking about free channels like BBC & ITV.

I am pretty sure that you can't do what you are asking, but if you could, it would be against forum rules to discuss it.

[wowwow]

the tv you have has a "freesat" receiver inside, so only fta is available.. the cam slot(if the tv has one) is for free view via an aerial.

[Burnham]

The cam slot - which this TV does have - is for any CI cam which will clear any encrypted channel on any satellite, IF you have a working emu or valid card.

But, I repeat what I said earlier, it is impossible to give a full answer to the original question without breaking forum rules.

[ABA]

just incase nobody has noticed he is trying to get astra 1
astra 1 that is located at 19.2 east
freesat is astra 2 at 28.2 east

and freesat is exactly what it says freesat only it wont tune in any scrambled channels
a little tip to get more channels out of your freesat box go in to the menus and go to the tuneing menus and where it says network search change it to enable then scan
on a normal scan you will get 140 chanels approx
but on a network scan you will get over 360 channels

[Burnham]

The Panasonic freesat TVs can get any scrambled channels with the right cam or cam+card.

[CROSSBONES]

I have a Dragon cam and sky card in my pany to watch C4 HD.

So you can watch encrypted channels.

Dont think it works with a sky HD sub, but would be interseting if some

one could try it;)

[mdaniels47]

thanks for all your replys
but im not shure how to recieve c4hd what satellite and frequency is it on and what do i need to recieve it i have a t-rex cam
thanks in advance
mike

[RABBY]

mdaniels47


hi m8s
have just bought panasonic 42 inch with freesat included.i am trying to watch astra 1,which card would i need to use and which files would enable the channels,which are encripted
thanks in advance
mike


Just hooked up my panasonic 42 Inch to my motorised dish ??? Just scanning Astra1 [19 East ] I Will soon tell you what you get ???:D The Tuner is Fooking Slow [ Says this may take 45 Mins to complete] Time for a Beer:cheers2:

[RABBY]

HD FTA Channels are [ 2 Arte thema HD , Simul HD , Anixe HD , Astra HD ,Einsfestival HD , ] All others are Encrypted :cool:


Must Look into a cam for the [panasonic ] OTHERS SHOULD OPEN:D

[echelon]

thanks for all your replys
but im not shure how to recieve c4hd what satellite and frequency is it on and what do i need to recieve it i have a t-rex cam
thanks in advance
mike

you should be looking at astra 2 at 28.2 east , not astra 1 at 19e

[RABBY]

echelon

I was Looking at the first post m8 ? As for the [ panasonic Z81 tv ] Looks good with the right cam in the slot;)

Must be the best TV On the market [ With a built in sat receiver ] Think it is the only ONE:respect-054:

The Tuner is slow [ But it has the lot ]:cool:

[echelon]

echelon

I was Looking at the first post m8 ? ]:cool:

I was looking at both of his 2 posts , which contradict each other

besides which there is very little open on 19e now

[CROSSBONES]

HD FTA Channels are [ 2 Arte thema HD , Simul HD , Anixe HD , Astra HD ,Einsfestival HD , ] All others are Encrypted


Must Look into a cam for the [panasonic ] OTHERS SHOULD OPEN

shame there`s no diseq settings with this tv

[RABBY]

CROSSBONES



shame there`s no diseq settings with this tv


It is Powering my [Omnisat ] Shame you cannot Bye these dish Movers Anymore?????:)

[CROSSBONES]

It is Powering my [Omnisat ] Shame you cannot Bye these dish Movers Anymore?????

Thats interesting! Think it was IRTE that made them.

I have seen a few on e bay.

How does it run the omnisat?

[AJR]

shame there`s no diseq settings with this tv

Could use a push button switch ..

[RABBY]

CROSSBONES


Thats interesting! Think it was IRTE that made them.

I have seen a few on e bay.

How does it run the omnisat?

Correct m8 [IRTE ] Made them ?? Basically the power comes from the receiver to move the Dish ?? Mines have been set up on the Dreambox [ Basically all sats have been stored , just click the remote controll to the sat you want ] The ones you have stored in the memory ?? Simple and easy to Use[ Only thing that is wrong with them ] ?? Only takes a 1 Metre Dish ??;) But you can tweek the dish[ Hor@ Ver ] Via Remote control :respect-055:


Shame they do not make them Anymore !