Diablo cam 2.3 cas3+guidance needed

[tomdeg]

Hi from tomdeg
trying to program a diablo cam using a cas 3 + with studio 8.5c
the steps and options iv'e tried
1. Formated the cam
2. Upgrade to underworld 1.43
--------------------------------------------
disconnect at this point reason being cain't find
keys that say diablo key bin file ?
I downloded a file from satpimps that said diablo key files
unziped it containd bin file but no reference to it being a diablo bin file?
The strange thing is when i load the cam into my darkbox hd rev 2008 it says underworld 1.37 insted of uw1.43
some guidance needed please
regards tomdeg

[gbmitie]

you have me slightly confused, I use 8.5b. When you upgrade cam are you letting it finish to completion?

When you want to laod a bin file you have to select cam file system, then click on connect on right hand side, remove old bin by delete, then go to where you have stored downlaoded new bin and use arrows to put it in cam.

To upgrade there is no need to reformat cam unless it was corrupt.

Say a bit more on what exactly you are doing. It really is very easy.

gb--

[tomdeg]

thank you for your reply i'll try and explain what i'm doing
first I download duolabs cas interface studio 8.5c then
open the studio download underworld 1.43 from satpimps
unzip folder extract files this reveals data bin file 4kb also
another zip file S2 tables left this unziped moved the databin file to desk top.
now back to the cas3 put the cam in the slot opend cas studio ver8.5c studio
plug the usb cable then click on cam select diablo
then again this opens the programmer
click on cam file systems then local folder desktop
select underworld1.43 data bin file click on connect then two green arrows appear think i clicked on the top arrow the bin files move to the right
under File name then confused clicked on the botom green arrow
a blue bar moved across the screen then pressed exit

[terry l]

Your posting in the wrong place perhap,s someone could transfer it to the diablo section..