UK & RoI v815.2003 Tomtom Map

[Russell1]

You need software version 8.2 (or newer) for this map & you cannot transfer you Home or other favourite locations :-

United_Kingdom_and_Republic_of_Ir eland v815.2003 map

http://www.megaupload.com/?d=HCT7BDO0

[nml]

Thanks Russel1,any chance of Western Europe ?

Thanks again nml

[lynxman]

Thanys matey

[nml]

Can anyone recommend a software version above 8.2 that is likely to work with a Go 700 for v815 ?

nml

[benick]

Can anyone recommend a software version above 8.2 that is likely to work with a Go 700 for v815 ?

nml

Been trying to get 8.11 on my 700 works but keeps crashing and rebooting so to answer your question no unless im doing something wrong

[Russell1]

Can anyone recommend a software version above 8.2 that is likely to work with a Go 700 for v815 ?

nml

Either 8.203 or 8.300 are the only v8 software versions available at the moment - I'm using v8.203 installed over a working v8.011 on my Go500. Will upload a copy of the v8.203 software I used & post link in a new thread later.

[nml]

Thanks Russell1 just what i need, at the moment i have 8.011 with 8.05 maps working fine.

nml

[Russell1]

Posted here for you -
https://www.satpimps.co.uk/showthread.php?t=97285
But remember to make a back up copy first.

[nml]

Thanks mate will give it a go.


nml

[spek]

hi all can i install this software in tomtom one

[Russell1]

hi all can i install this software in tomtom one

Think it will be OK for you - but make sure you have a full working back up copy first so all can be restored just incase it doesn't work.

[matt_dci]

You need software version 8.2 (or newer) for this map & you cannot transfer you Home or other favourite locations

Have just updated my Go300 to run software 8.2 and map 815.2003 and have also transfered all my favourites across, using the mapsettings.cfg file.

:respect-055:

[Cestrian]

Thanks Russell , but I can't get it to run on my 300. Downloaded 8.203.9717 and followed the instr. to the letter but it freezes on the opening tomtom screen. Looks like I will have to restore the backup of my V7 maps.

[matt_dci]

Thanks Russell , but I can't get it to run on my 300. Downloaded 8.203.9717 and followed the instr. to the letter but it freezes on the opening tomtom screen. Looks like I will have to restore the backup of my V7 maps.

I got the software and maps to work on my 300, but it freezes and reboots if you try to navigate to a postcode :confused:

It will navigated to a POI or stored favourite with no problems, so am pretty stumped :frown:

[Russell1]

I got the software and maps to work on my 300, but it freezes and reboots if you try to navigate to a postcode :confused:

It will navigated to a POI or stored favourite with no problems, so am pretty stumped :frown:

Think I've seen this problem reported elsewhere - try using QWERTY keyboard setting & use small characters.

[Russell1]

Thanks Russell , but I can't get it to run on my 300. Downloaded 8.203.9717 and followed the instr. to the letter but it freezes on the opening tomtom screen. Looks like I will have to restore the backup of my V7 maps.

It's working (but not perfectly) for matt_dci - so should get a bit further than you are getting - have you got a different memory card you could try in it ?

[Cestrian]

It's working (but not perfectly) for matt_dci - so should get a bit further than you are getting - have you got a different memory card you could try in it ?

Thanks, I'll give that a try and report back.

[matt_dci]

Think I've seen this problem reported elsewhere - try using QWERTY keyboard setting & use small characters.

Cheers for that Russell :respect-051:

Made the changes and now works perfectly :woot-035:

[gbmitie]

@mattdci, could you explain to a noob how you did the update, I have same as you the 300. And is it working ok now with the tweaks?

I have posted earlier before I saw your bit on the 300.

gbmitie