Tuner Set up help needed

[sonic1]

I don't know if any of you with a 800 can help with this or if it will be trial and error.
My main box which controls my motor is my 7020.
In the bedroom I have the 800.
The 800 is connected to a fixed dish at 28.2e via an AB diseqc switch,
A = fixed dish
B = second feed from my motorised dish.
I do not want to move the dish with the 800 but just make it switch to the correct sat when I have positioned it with the 7020
I have this working fine with my 7000 in the bedroom but the menu and configuration is quite different with the 800.
If you can follow what I am saying well done:D
If you have a solution it would be appreciated :bowing-036:

[canthackit]

wot about.

commited DiSEqc command......in the tuner setup, if you scroll right there's various options:respect-057:

regards: canthackit

[sonic1]

Ok the one set at 28.2 east is input 1 into the switch you can then set all the other sats as per screen shot of 19.2 east.
Only took me all weekend to figure out :smash:

http://img389.imageshack.us/img389/2914/screenshot10385096md2.jpg


http://img229.imageshack.us/img229/179/screenshot20469457mi3.jpg

[canthackit]

but you got it sorted, well done mate.

regards: canthackit