help

[bjpenn123]

iam adding EDG-NEMESIS 4.4 for TM9100-SUPER to box on mmc via iboot and works fine in sending over to mmc but when i boot box up the remote wont work?? i have a 9100 super if this helps cheers

[bjpenn123]

also tryed Andromeda 1.0 and ur14 and it is the same carnt use remote?

[onecard]

Believe it or not the most common reason for this is the batteries, check the batteries in the remote, even if they work in something esle put new ones in, the remote is vary power hungry

[onecard]

Also when using the newer images in mmc you should have an up to date image with the latest drivers in flash.

[bjpenn123]

thanks will give it a try with new mmc and batterys !

[bjpenn123]

tried new battery's , fresh mem card and still no joy? when i flash new image it is via laptop wireless is that a problem?

[echelon]

its more than likely dependent on what is in your flash , so try a newer dual boot ds flash image for booting with

[bjpenn123]

so is this to overwite my factory image ie... without mmc in? sorry iam a bit new to this lol

[echelon]

so is this to overwite my factory image ie... without mmc in? sorry iam a bit new to this lol

yes , your newer mmc images are incompatible with earlier flash images and so that is why you have no remote control ability

reflash the image in the flash and add jiboot into it and your mmc images should work ok , or use older mmc images instead to match up with the old flash

new images need a newer type of flash to work

[bjpenn123]

jiboot keeps saying -------------- Telnet session started
Telnet : Wrong login/password , but i changed it in tmc ?

[bjpenn123]

sorted now guys thanks for all the help! only slight problem now is nemisis won't let me d/l any addons it stops on me and i have to power it off at plug , not to bad just have to ftp everything over i suppose?

[echelon]

sorted now guys thanks for all the help! only slight problem now is nemisis won't let me d/l any addons it stops on me and i have to power it off at plug , not to bad just have to ftp everything over i suppose?

maybe thats the new 4.4 edg so try 4.2 or 4.1 as they should work

you should also find the dreambox ones nabilo and gemini will work from mmc too if you boot into non-standard mode from the ds flash

[bjpenn123]

booted into non standard and nabilo and gemini just keep rebooting my box, got 4.2 edg to work and ur14 but problem is my gb*x wont d/l from image and i don't know how to ftp it over on any of the images cos i don't have gb*x files for nem or ur14.... sorry to be a pain but iam buggered now .