Echostar AD-3600 IP Viaccess

**paul123** · 11-02-2008, 10:51 PM

ih i have got a Echostar AD-3600 IP Viaccess
my problem is i do not now how to get the DiSEqCT 1.0 motor to work .
the moter work fine with my dreambox 7000s.
but not with my echostar it keep saying motor error
would like some settings to set the reciever if some one could help me
please thank for you time
paul:

**Magwitch** · 12-02-2008, 12:06 AM

DiseqC 1.0 is only used for switching ports on a DiseqC switch on the Echostar.

Motors (36V, not DiseqC motors) are controlled by the Echostar's positioner.

Magwitch

**pilsner** · 12-02-2008, 10:56 AM

he needs a v-box to control disec motor.pilsner

**Magwitch** · 12-02-2008, 01:47 PM

No mate. They control 36V motors, either as a stand-alone positioner or through a receiver with DiseqC 1.2.

**sstylianou1976** · 13-02-2008, 01:26 AM

I have the old receiver myself and let me tell you it is catered for 36volts motor jacks not diseqc so if I were you change your motor on the dish to 36 volts jack and have the right cabling to go with it or it won't work. Personally I don't like Diseqc it is too slow and not very good for high winds if you have a big dish so personally it is the worst invention on the sat scene call me old fashioned but I like speed and power and Diseqc does not have it so I am steering clear of it so a big mistake by the receivers manufacturers to do away with 36v positioners etc.

Regards,

sstylianou1976

**pilsner** · 13-02-2008, 10:15 AM

well said 36v rules.pilsner

**satwyn** · 13-02-2008, 11:47 AM

the diseqc motor has it's uses limited I agree but a cheap and easy way into multi sat reception they used to have a high failure rate some makes are better than others