i get a similar even worse in my case, problem with media center.
i managed to reproduce it
i was seeing an hd channel when i decided to test the mediacenter functionality so i tried to run a .mkv
the symptom is that i get the sound running well of the .mkv but i get a freezed picture of the last hd channel.
.avi are not creating any problems
only.mkv
is there any solution around?
the autoresolution plugin would help?
Last edited by nstergi; 27-10-2011 at 02:39 PM.
MKV with 720p works fine here.
Without problems with the HD-Channel
Last edited by enzian96; 27-10-2011 at 02:54 PM.
Some MPEG4 probs here but not mkv's... In this installation of mine.
If I re-did it it might be quite different...
Waiting for a better flashing tool...
Well, sometimes I lose all color - back to the B/W days. After a restart(gui) itīs back again. Did a re-install but this was back again after a while. Donīt happen too often so I can live with it.
However the subtext on some channels are in red !! Where can I change this ? It is hard to read red text - some channels are in white - much better. On a Premium. Will test Elite next week.
Else this image is rather good I say. Some small fixes and it will be OK
How do I install this, no e2 patch file
sortedOriginally Posted by Ceaser
Same here on the Elite on the RF modulator output, sometimes loses colour
Last edited by scopus; 30-10-2011 at 11:12 AM.
i need help i have dish with whith, Astra , Eutelsat ,Hotbird and Astra 28 i configure on azbox Diseqc A/B/C/D but i have singnal only in Hotbird i change port but no sucses i put with positioner i have sinjal only in Hotbird , and if i put hotbird in port a i have sinjal if i put hotbird in prot b i have sinjal soo can u help me , or azbox not support this like in dm800 ??
Of course DiSEqC is supported.
I always take extended in receive settings.
In attachement you see eg. settings for D
diseqc_D.jpg
my frined in ma reciver i put like this :
Configuration mode :simple
Mode : DISEqC A/B/C/D
Port A : Astr... 19.2E
Port B : Eutel...16E
Port C : Hot.... 13E
so i have 4 LNB in my dish :( but i have singnal only on Hotbird , my dish i static not
Try configuration: extended
Satellite: Astr... 19.2E
LNB: LNB 1
DiSEqC modus: 1.0
DiSEqC command transfer: AA
Satellite: Eutel...16E
LNB: LNB 2
DiSEqC modus: 1.0
DiSEqC command transfer: AB
Satellite: Hot.... 13E
LNB: LNB 3
DiSEqC modus: 1.0
DiSEqC command transfer: BA
no sucses :( i think enigma 2 in azbox not support 4 LNB :( bc however i put just hotbird have singnal i put just with singel satelite and that satelite i put astra and i have signal on hotbird i remove hotbird from configuration i put astra eutelsat astra2 and again have signal on hotbird strange :(
....yessss.... I had 16 LNBs... DiSEqC 1.1.
So, it should work just fine with 4...
hmm okay m8 so i have to chacke diseq on the ruff
Hurry up, Santa is coming !
Update for media centre 0.3.5 (From MickeySa)Place file in /usr/bin and reboot receiver.Code:http://www.multiupload.com/QWTXK6QHWO
i need help to update mediacenter bc i have 0.3.2 so i need to putt 0.3.5 bc with this version i can't play video from usb ore photo with mediacenter of spasa 2.0 i can but i like to use this image bc is to fastt :( so help me to update media center pls
Here the mediacenter 0.3.5 plugin
enigma2-plugin-extensions-mediacenteraz_0.3.5-smp8634_mipsel.ipk.zip
This is from the coder of PB, Stibbich:
FTP this file to /tmp folder; thenPlease wait until things are in the git and updated for the image - mixing is not good I think...
Only installing the media-center - if it works - ok - but in the most cases this causes a new flashing I think...
Telnet command:
ipkg install /tmp/enigma2-plugin-extensions-mediacenteraz_0.3.5-smp8634_mipsel.ipk
Then add the DVD fix to play full DVDs...
Posting Permissions
Reply With Quote
Bookmarks