what is password to login on DCC on OpenAZBox PLi MOD HD Release ?
root azbox dose not work
what is password to login on DCC on OpenAZBox PLi MOD HD Release ?
root azbox dose not work
did you try "Dreambox"? or "dreambox"..
Found OpenRSI to be better than Azbox Open Mod for Premium HD anyway.
Update: When I go into Setup_Software Update I now see 4 different options and message:
Do you want to update your receiver to<a href="/bankin?
(5 upload packages available)
..however it still does not seem to connect to update server.
Last edited by GalwaySat; 07-12-2012 at 06:34 PM.
@ Galwaysat
yes :(
Hi,
Try to connect via a standard telnet session, login is root password should be azbox.
But it is possible that there is no password, some FTP program gets trouble if there is no password defined in the STB.
So connect via telnet to check if there is or not a password.
If there is no password type:
and define the password of your own, don't forget it!Code:passwd
Then try again with DCC.
did a re-flash works OK now
Finally got it to work, in order to to do this I had to play around with the network settings and edit DNS to add in the Primary & Secondary DNS IPs from my provider before the update worked.Originally Posted by jimmyjim11
After downloading the update and rebooting I notice that I can now see the plugins via green button even though it did not save the settings for primary & secondary DNS.
Next question is, are the software updates the same as the what is in the latest image for download, or is it better to download the latest image and load via azup to stay up to date?
so it wasnt DHCP then, no internet services would have worked.
did an online update today, after box rebooted, all i got was STARTING VFD or something, that was it!
ANNOYING!!!!!!!!!!!!!!!!!!!!!!
im not the only one:
_http://www.opensat4all.com/forums/topic/4733-azbox-hd-premium-no-boot-black-screen-after-update/
Last edited by ManikM; 12-12-2012 at 09:15 PM.
I learned that lesson early on because for me every time I chose the online update it killed my mediaplayer and I had to reload manually. In the end I stop bothering with the updates altogether unless there was a major change but even then did a complete reflash instead of an online jobby.
thanks!
ive manually installed DEC 12th now, and now there is an HDD bug, not mounting at start...cant be bothered to sort now... GRRR!
installing the dec 13th image fixed it
I too installed the updates and my box would not reboot past the vfd ready message, very frustrating. I just re-copied the kernal across and this saved me the hassle of a full re-install.
Timers start but don't stop on this image
EDIT: this was the AUTOTIMER plugin causing these hangs and weird recording issues
Last edited by ManikM; 17-12-2012 at 10:30 AM.
Still running 1.7 but one problem - does not connect to RTi update server - anyone got the correct address and where do i put it?
thanks
i tried openrsi 2.1 but it has the ch4 hd bug, i then went back to 3.0 (ch4 hd bug fixed) and ran the hard disk file system check - since then, no more spinnners, and 4 successful timer recordings...
hope it stays this way, i'll finally be happy with the azbox if it does.
Record bug was only on OpenRSI 3.0 with kernel 3.5.5. This image have destroyed the filesystem of HDD. Now OpenRSI 3.0 with kernel 3.3.1 is OK.
i dont understand this - as i downgraded kernel after trying 2.1 - then when i saw it had the ch4 bug i reinstalled a dec 28th image which installs the 3.3.1 kernel (AFAIK) and i still had and have the spinner issue, drives me buts, its the last piece of the puzzle for me
or do u mean since have the new kernel, i need to reformat the disk?
Have a look do your disk if filesystem is not corrupt.
fsck.ext3 /dev/sda1
eg. for an ext3-formatted disk as sda1-device.
says: /dev/hdb1: clean, 290/357744 files, 48497097/244190645 blocks
Posting Permissions
Reply With Quote
Bookmarks